Standard accessories of electrical controlling:
◦ Auto temp controlling switches.
◦ Compression holding timer.
◦ Manual / auto selecting switches.
◦ Compensated pressure setting gauge.
◦ Motor overload pilot lamp.
◦ Emg. Stop switches.
◦ Auto start switches.
◦ Creep elevating switches.
◦ Electric heating abnormal indicating meter.
|Platen size||2500×1300 mm||2500×1300 mm|
|Daylight||100 mm||100 mm|
|Total thrust||200 Ton||300 Ton|
|Stroke||500 mm||500 mm|
|Hyd. power||15 HP||15 HP|
|Max. electric platen||13.6 KW||13.6 KW|
|Machine size||3900×1800×2800 mm||3900×1800×2800 mm|
◦ The heating style of this m/c can be divided into electric thermo-couple heating, steam boiler heating & hot transfer oil heating etc.
◦ The electric platen is made of thick rigid steel plate and drilling hole to inserted the electric heating tube, the heating resistant can be reached 150°C max, and the max. pressure resistant which about 20 kg/cm2.
◦ The steam platen is made of thick rigid steel plate and drilling hole to circulate the heating medium, the heating resistant can be reached 200°C max, and the max. pressure resistant which about 20 kg/cm2.
◦ The impressing platen surface is plated with stainless steel which convenient for pressing processed.
◦ The two end of m/c is installed gear rack which can be made the hydraulic cylinder synchronous elevating completely. Since, the total acting force of impressed platen can be spreaded evenly.
◦ This m/c is suitable for lumber, plywood, membrane, decorative paper, veneered paper or PU injection forming, foam forming, bakelite hot pressing forming & chip board forming etc.