Absolute value motor are recommended for tilting axis.

TRNC-125H

Specifications / Model | Unit | TRNC-125H | ||
---|---|---|---|---|

Worktable Diameter | Ømm | Ø125 | ||

Table Height | Horizontal | mm | 236 | |

Center Height | 90° | mm | 150 | |

Overall Height | 90° | mm | 260 | |

Center Bore Diameter | Ømm | Ø25^{H7} | ||

Through-Hole Diameter | Ømm | Ø13 | ||

Width Of T-Slot | mm | 12^{H7} | ||

Width Of Guide Block | mm | 14^{H7} | ||

Tilting Angle | deg. | -40°~+120° | ||

Axis | Rotation | Inclination | ||

Minimum Input Increment | deg. | 0.001° | ||

Indexing Accuracy | sec. | 40" | 60" | |

Repeatability | sec. | 4" | － | |

Servo Motor (Model As Required) | FANUC | αiF 2 | αiF 2 | |

MELDAS | HF-75T | HF-75T | ||

Speed Reduction Ratio | 1/90 | 1/180 | ||

Table Rotation Speed | r.p.m | 55.5 | 27.7 | |

Allowable Inertia Force | kg-cm-sec^{2} | 2 | ||

Allowable Turntable Torque | kg-m | 8 | ||

Drive Pressure / Method | kg/cm^{2} | 5 / Pneumatic | 35 / Hydraulic | |

Clamping Torque | kg-m | 8.5 | 17 | |

Allowable Load Capacity | 0° | kg | 50 | |

0°~90° | 35 | |||

Allowable Workpiece Diameter | Ømm | Ø125 | ||

Net Weight (Motor Excluded) | kg | 106 |

- Note：
- 1. "★" Means with encoder of HEIDENHAIN ECN-2XX series.

2. "◎" Means With built-in Pneumatic/Hydraulic converter.

3. The tilting shaft on model TRNC-170A and TRNC-210A provides a choice of electric side mounting, as TRNC-125H.(L type)

TRNC-170C

Specifications / Model | Unit | TRNC-170C | ||
---|---|---|---|---|

Worktable Diameter | Ømm | Ø170 | ||

Table Height | Horizontal | mm | 280 | |

Center Height | 90° | mm | 190 | |

Overall Height | 90° | mm | 380 | |

Center Bore Diameter | Ømm | Ø35^{H7} | ||

Through-Hole Diameter | Ømm | Ø35 | ||

Width Of T-Slot | mm | 12^{H7} | ||

Width Of Guide Block | mm | 18^{H7} | ||

Tilting Angle | deg. | -35°~+120° | ||

Axis | Rotation | Inclination | ||

Minimum Input Increment | deg. | 0.001° | ||

Indexing Accuracy | sec. | 20" | 60" | |

Repeatability | sec. | 4" | － | |

Servo Motor (Model As Required) | FANUC | αiF 4 | αiF 4 | |

MELDAS | HF-104T | HF-104T | ||

Speed Reduction Ratio | 1/90 | 1/120 | ||

Table Rotation Speed | r.p.m | 44.4 | 33.3 | |

Allowable Inertia Force | kg-cm-sec^{2} | 4.9 | ||

Allowable Turntable Torque | kg-m | 15 | ||

Drive Pressure / Method | kg/cm^{2} | 5 / Pneumatic | 5 / Hydraulic | |

Clamping Torque | kg-m | 8.5 | 8.5 | |

Allowable Load Capacity | 0° | kg | 50 | |

0°~90° | 35 | |||

Allowable Workpiece Diameter | Ømm | Ø170 | ||

Net Weight (Motor Excluded) | kg | 126 |

- Note：
- 1. "★" Means with encoder of HEIDENHAIN ECN-2XX series.

2. "◎" Means With built-in Pneumatic/Hydraulic converter.

3. The tilting shaft on model TRNC-170A and TRNC-210A provides a choice of electric side mounting, as TRNC-125H.(L type)

TRNC-210C

Specifications / Model | Unit | TRNC-210C | ||
---|---|---|---|---|

Worktable Diameter | Ømm | Ø210 | ||

Table Height | Horizontal | mm | 280 | |

Center Height | 90° | mm | 190 | |

Overall Height | 90° | mm | 380 | |

Center Bore Diameter | Ømm | Ø45^{H7} | ||

Through-Hole Diameter | Ømm | Ø45 | ||

Width Of T-Slot | mm | 12^{H7} | ||

Width Of Guide Block | mm | 18^{H7} | ||

Tilting Angle | deg. | -35°~+110° | ||

Axis | Rotation | Inclination | ||

Minimum Input Increment | deg. | 0.001° | ||

Indexing Accuracy | sec. | 20" | 60" | |

Repeatability | sec. | 4" | － | |

Servo Motor (Model As Required) | FANUC | αiF 4 | αiF 4 | |

MELDAS | HF-104T | HF-104T | ||

Speed Reduction Ratio | 1/90 | 1/120 | ||

Table Rotation Speed | r.p.m | 44.4 | 33.3 | |

Allowable Inertia Force | kg-cm-sec^{2} | 4.9 | ||

Allowable Turntable Torque | kg-m | 15 | ||

Drive Pressure / Method | kg/cm^{2} | 5 / Pneumatic | 5 / Pneumatic | |

Clamping Torque | kg-m | 8.5 | 8.5 | |

Allowable Load Capacity | 0° | kg | 50 | |

0°~90° | 35 | |||

Allowable Workpiece Diameter | Ømm | Ø210 | ||

Net Weight (Motor Excluded) | kg | 131 |

- Note：
- 1. "★" Means with encoder of HEIDENHAIN ECN-2XX series.

2. "◎" Means With built-in Pneumatic/Hydraulic converter.

3. The tilting shaft on model TRNC-170A and TRNC-210A provides a choice of electric side mounting, as TRNC-125H.(L type)

TRNC-255A

Specifications / Model | Unit | TRNC-255A | ||
---|---|---|---|---|

Worktable Diameter | Ømm | Ø255 | ||

Table Height | Horizontal | mm | 400 | |

Center Height | 90° | mm | 400 | |

Overall Height | 90° | mm | 550 | |

Center Bore Diameter | Ømm | Ø50^{H7} | ||

Through-Hole Diameter | Ømm | - | ||

Width Of T-Slot | mm | 12^{H7} | ||

Width Of Guide Block | mm | 18^{H7} | ||

Tilting Angle | deg. | -30°~+120° | ||

Axis | Rotation | Inclination | ||

Minimum Input Increment | deg. | 0.001° | ||

Indexing Accuracy | sec. | 15" (Gear) ★20" (Belt) | ★20" (Belt) | |

Repeatability | sec. | 4" | － | |

Servo Motor (Model As Required) | FANUC | αiF4/ αiF 8 (recommend) | αiF 8 | |

MELDAS | HF-104T | HF-154T | ||

Speed Reduction Ratio | 1/120 | 1/120 | ||

Table Rotation Speed | r.p.m | 25 | 25 | |

Allowable Inertia Force | kg-cm-sec^{2} | 6.4 | ||

Allowable Turntable Torque | kg-m | 16 | ||

Drive Pressure / Method | kg/cm^{2} | 5 / Pneumatic | 5 / Pneumatic | |

Clamping Torque | kg-m | ◎50 | ◎50 | |

Allowable Load Capacity | 0° | kg | 100 | |

0°~90° | 50 | |||

Allowable Workpiece Diameter | Ømm | Ø255 | ||

Net Weight (Motor Excluded) | kg | 599 |

- Note：
- 1. "★" Means with encoder of HEIDENHAIN ECN-2XX series.

2. "◎" Means With built-in Pneumatic/Hydraulic converter.

3. The tilting shaft on model TRNC-170A and TRNC-210A provides a choice of electric side mounting, as TRNC-125H.(L type)

TRNC-255B

Specifications / Model | Unit | TRNC-255B | |||
---|---|---|---|---|---|

Worktable Diameter | Ømm | Ø255 | |||

Table Height | Horizontal | mm | 330 | ||

Center Height | 90° | mm | 235 | ||

Overall Height | 90° | mm | 388 | ||

Center Bore Diameter | Ømm | Ø100^{H7} | |||

Through-Hole Diameter | Ømm | Ø100 | |||

Width Of T-Slot | mm | 12^{H7} | |||

Width Of Guide Block | mm | 18^{H7} | |||

Tilting Angle | deg. | -40°~+120° | |||

Axis | Rotation | Inclination | |||

Minimum Input Increment | deg. | 0.001° | |||

Indexing Accuracy | sec. | 15"★15" | 60"★20" | ||

Repeatability | sec. | 4" | － | ||

Servo Motor (Model As Required) | FANUC | αiF 4 | αiF 8 | αiF 8 | |

MELDAS | HF-104T | HF-154T | |||

Speed Reduction Ratio | 1/90 | 1/180 | |||

Table Rotation Speed | r.p.m | 44.4 | 33.3 | 16.6 | |

Allowable Inertia Force | kg-cm-sec^{2} | 11 | |||

Allowable Turntable Torque | kg-m | 48 | |||

Drive Pressure / Method | kg/cm^{2} | 35 / Pneumatic | 35 / Pneumatic | ||

Clamping Torque | kg-m | 46 | 46 | ||

Allowable Load Capacity | 0° | kg | 140 | ||

0°~90° | 80 | ||||

Allowable Workpiece Diameter | Ømm | Ø255 | |||

Net Weight (Motor Excluded) | kg | 400 |

- Note：
- 1. "★" Means with encoder of HEIDENHAIN ECN-2XX series.

2. "◎" Means With built-in Pneumatic/Hydraulic converter.

3. The tilting shaft on model TRNC-170A and TRNC-210A provides a choice of electric side mounting, as TRNC-125H.(L type)