657567673

GE FONG MACHINERY CO., LTD.

Taiwan Manufacturers, Exporters.

Products

New Precision Swiss-turn Gang Tool Type CNC Lathe

Precision-Swiss-turn-gang-tool-type-CNC-lathe

  • Model No: GO-265 / 325
  • Factory Location: Taiwan
  • Sample Request: No
  • Target Markets: Worldwide

Detail Information

Description :

Simultaneous complex machining with main and back spindle!
More innovative features available
•Larger bar capacity (Ø26/32mm)
•Higher rigidity
•Powerful spindle motors
•Greater tooling layout choices

Specification :

ModelGO-265GO-325
Machining capacityMain spindleBar stock diameterØ8~26 mmØ8~32 mm
Machining length320mm (Direct- drive guide bushing)
50mm / 70mm (Guide bushing-less)
115mm (Mechanical-drive rotary guide bushing)
DrillingØ12 mm
TappingM10
Deep hole drillingØ10mm
Back spindleWorking chuck diameterØ26 mm / 32 mm
DrillingØ10 mm
TappingM8
Tool spindle   spindleDrilling / tapping (Left cross tool)Ø8mm / M6
Drilling / tapping (Right cross tool)Ø8 mm / M6
Drilling / tapping (Back tool)Ø8 mm / M6
Slitting sawØ45 mm ( Right cross tool T04)
SpeedMain spindle200~10,000 min-1200~8,000 min-1
Back spindle200~10,000 min-1200~8,000 min-1
Direct-drive rotary guide bushing200~10,000 min-1200~8,000 min-1
Tool spindle200~6,000 min-1
(Standard: 4,800 min-1)
Tool size
OD tool shank16 × 16 × 100 mm
Boring tool shank (For face/back ID tool or back tool post )Ø25 mm
Chuck for left cross toolsER16 × 3 ; ER20 × 1
Chuck for right cross toolsER16
Chuck for back live toolsER16
Chuck for back fixed toolsER16 (OP. : ER20)
Chuck for deep hole drillER16
Tool position No. (Max. mountable tool No. ):        27 ( 39 )                                            
Left OD turn tool post5
Right OD turn tool post2 (OP. : 7)
Front/back ID tool post (one-body)5
Back tool post4
Left cross tool post4
Right cross live tool post3
Face deep drill2
Motor
Main spindle3.7 / 7.5 KW ( Rated / 10% )
Back spindle2.2 / 3.7 KW ( Rated/ 10 min.)
Left cross tool1.0 KW
Right cross tool1.0 KW
Back tool1.0 KW
Direct-drive rotary guide bushing2.2 / 3.7 KW (Rated/ 10 min.)
X1, Y1, Z1, X2, Z2 axis0.75 KW
Coolant pump0.75 KW
Lubricating pump0.011 KW
Hydraulic pump (※2)None0.75 KW
Axis travel
X1142mm
Y1348mm
Z1320mm (Direct-drive rotary guide bushing)
X2370mm
Z2335mm
Others
Weight3,500 KGS
Rated power (Capacity) (※3)15.36 KW( 21.4 KVA)16.11 KW( 22.5 KVA)
Compressed air requirement≧4 KG/cm2
Air consumption≧100 NL/min
Coolant tank capacity180L
Machine dimensions (W×D×H)2,150 × 1,280 × 1,930 mm
※1 : GO-325 uses hydraulic cylinder to clamping the bar to be machined.
※2 : The required power source should be ≧19.6/20.6 KVA (GO-265/325), including extra 2KVA for bar feeder, chip conveyor, and oil mist separator…etc.
※3 : All specifications are subject to change without notice in advance.

GE FONG MACHINERY CO., LTD.

  • Taiwan
  • No.118, Sec. 3, Yeatan Rd., Tantzu Dist., Taichung, 42756, Taiwan
  • 886-4-253-34855
  • 886-4-253-34857
  • 657567673