*This machine has CE marking
*This machine is an automatic 4 spindle bobbin coil winding machine.
*Machine equips with CNC 4-axis AC servo motor transmission system, accuracy position control.
*This machine has installed automatic safety door closing and opening to prevent damage during operation.
*Coil winding machine equips with built-in Hot air heater for copper wire bonding mechanism during wire winding.
*Coil winding machine equips with built-in copper wire strip (enamel removing) mechanism.
*Coil winding machine equips with Air-cutter for thick wire over 0.3 mm to reduce remain wire on pin of bobbin.
*Automatic continuous winding makes cycle times reduce.
*It is equipped with PLC system, touch panel and AC servo motor.
*Parameter (program) set thru PLC system and 10″ touch panel.
*Quickly change tooling is offered in machine, it does not need tools to change it for time saving and keep precision.
*Machine equips with a Nozzle mechanism to rotates the nozzle 0, 90, 120 degrees for wire wrapping (binding) on pin of coil (bobbin) .
*Single wire or Multi-wires (bi-filar ) winding is available.
*Machine can perform perfect layer winding.
*Machine equips with quality mechanism tensioner controls winding quality
*Machine equips with a set of flexible wire gripper, it will not have residual remain wire keeping for cost saving.
*Password function is provided to prevent program from modified by non-related person.
*Safety door open/closed automatic
|Controller||CNC 4 axle AC servo motor driven|
|Storage||Flash Drive and 512MB fast-access memory, program is compatible with IBM PC|
|Spindles||4 Spindles, Pitch: 80mm|
|Speed||Max 9,000 rpm CW/CCW|
|Accuracy of Motor||1 revolution/360°|
|Accuracy of angle||+/-0.5°|
|Nozzle movement||X axle（F/B）90 mm, unit 0.01 mm|
Y axle（L/F）80 mm, unit 0.01 mm
Z axle（U/D）50 mm, unit 0.01 mm
|Wire dia||0.02 – 0.6 mm|
|Max winding diagonal||70m/m|
|Max winding length||70m/m|
|Wrap speed||Max 150rpm|
|Power supply||3 phase/220V/50/60 HZ|
|Machine size||1200(L)x900(W)x1400(H) mm|