1.High accuracy, high rigidity, and with a big through hole.
2.Capable of 4 axis simultaneous machining with machine tools.
3.Capable of single shaft control with single axis controller.
4.Available for horizontal and vertical using.
Model | Unit | MNC-130 | MNC-172 | MNC-200 | MNC-221 | MNC-251 | MNC-321 | ||
Item | |||||||||
Table Diameter | mm | Φ130 | Φ170 | Φ200 | Φ220 | Φ250 | Φ320 | ||
Overall Height in Horizontal | mm | 153 | 175 | 175 | 205 | 210 | 230 | ||
Center Height in Vertical | mm | 105 | 135 | 160 | 160 | 190 | 230 | ||
Through Hole Diameter | mm | Φ37 | Φ45 | Φ45 | Φ64 | Φ64 | Φ90 | ||
Spindle Hole Diameter | mm | Φ30H7 | Φ45H7 | Φ45H7 | Φ64H7 | Φ64H7 | Φ90H7 | ||
Width of T-slot | mm | 10H7 | 12H7 | 12H7 | 12H7 | 12H7 | 14H7 | ||
Width of Guide Block | mm | 18H7 | 18H7 | 18H7 | 18H7 | 18H7 | 18H7 | ||
Servo Motor (Option) | FANUC | αiF2 | αiF4 | αiF4 | αiF4 | αiF8 | αiF12 | ||
MELDAS | HF-75T | HF-104S | HF-104S | HF-104T | HF-154T | HF-204S | |||
SIEMENS | 1FK7042 | 1FK7060 | 1FK7060 | 1FK7060 | 1FK7063 | 1FK7083 | |||
HEIDENHAIN | QSY96A | QSY116C | QSY116C | QSY116C | QSY116E | QSY155B | |||
Total Reduction Ratio | 01:45 | 0.083333 | 0.083333 | 0.104167 | 0.125 | 0.125 | |||
Max. Rotation Speed | r.p.m. | 44.4 | 33.3 | 33.3 | 22.2 | 16.7 | 16.7 | ||
Motor 2000min-1 | |||||||||
Min. Increment | deg. | 0.001 | 0.001 | 0.001 | 0.01 | 0.001 | 0.001 | ||
Indexing Accuracy | arc-sec | 60 | 20 | 20 | 20 | 20 | 20 | ||
Repeatabilitiy Accuracy | arc-sec | 6 | 6 | 6 | 6 | 6 | 6 | ||
N.W. | kg | 30 | 50 | 60 | 86.5 | 93 | 170 |