Our "H" series Rotary Table Presses, Modeles JC-RT-16H/JC-RT-20H / JC-RT-24H have proven to be reliable for:
* Accurate tabletting.
* Compression in two stages.
* Tabletting compartment separated from drive mechanism.
* Easy maintenance & cleaning.
* Meets GMP.
* Efficient medium size production runs, with capacity upto 100,000 table per hour.
* Laboratory and pilot plant studies.
Cam Design & Lubrication
A Central lubrivation system supplies oil continuously to lower punches, while grease applied manually lubricates upper punches. The ejection cam is manufactured from special tool steel for extended life, while a doublesided lifting cam is provided.
Direct Rotation of Turret
Direct rotation of the turret by the main shaft reduces the moise level; it provide maximum protection to the gears and the deive system.
Upper & Lower Punch Seals
The scrapers seals for the upper punches prtect tables from oil drip, while the dust seals on the lowers prevent the punches from binding and reduce wear on the cam. This combined with an efficient dust extraction system allows prolonged run with little downtime for cleaning.
PRE-Compression and Main Compression
High pre-compression of 3000 kgs insures trouble-free processing of difficult granules. It helps in the direct compaction of difficult granules. It helps in the direct copaction of materials, redcing lamination and capping. Pressure rollers are made of special tool steel that ensures uniform pressure application. The double bearinfs are fitted, which minimize wearing of the rollers.
Feeding Material The feeder support
Platform is preset at the factory to the correct height and should not require adjustment. Quick release clamping screws allows removal of the feeder for cleaning and tool changeover without the need to disturb the feeder plarfrom setting.
The two chambers feeding system has been improved further. Itis driven from top by a variable speed motor. The unit can be assembled or disassembled easily.
Cleaning and Tool Changeover
The detachable panels can be removed easily, which reveal the entire bottom punch cams, This allows easy removal of the bottom punches. Upper punch monitoring device is available that would switch off the machine in the event of punch tightness.
1. Revolution of turret / Min (60 cyc): 18-72 RPM
2. Maximum operating pressure: 10,000kgs (22,000lb)
3. maximum pre-pressure: 3,000kgs (6,600lb)
4. Turret P.C.D: 253 mm
5. Power consumption: 3HP (2.2kw)
6. Machine dimensions: 850x790x1710mm (not including hopper)
7. Net weight: 1200 kgs (2646 Ibs)