Shang Ta Chia Industrial Co., Ltd.

Taiwan Manufacturers, Exporters.

Products

PC Hollow Profile Sheet Co-Extrusion Lines

PC hollow profile sheet extrusion line

  • Model No: 130
  • Factory Location: Taiwan
  • Sample Request: No
  • Target Markets: Worldwide

Detail Information

Description :

Transparent PC hollow plate is a type of engineering plastic plate material with extremely good comprehensive performance, and a material widely applied internationally nowadays with high strength, good light permeation, sound isolation and energy saving properties. The hollow plates also have many advantages of lightweight, roughing and resisting to abrasion, moisture and corrosion proof, isolating from heat and vibration, and easy for processing.

The flexibility and plasticity of PC hollow plates make them an ideal material for domes and other curved surfaces. The minimum bending radius can be 175 times of the plate thickness(bending radius 175 thickness).

Specification :

1. Main extruder:

(1) Screw diameter: 120mm.

(2) Screw L/D ratio: 33:1.

(3) Barrel temperature control: 7 zones.

(4) Main motor: 250HP motor made in Italy.

(5) Screen changer: 1 set.

(6) Gear pump: 1 set.

2. UV extruder:

(1) Screw diameter: 35mm.

(2) Screw L/D ratio: 28:1.

(3) Barrel temperature control: 3 zones.

(4) Main motor: 20HP motor.

(5) Screen changer: 1 set.

(6) Gear pump: 1 set.

(7) Feedblock: 1 set.

3. T-die:

(1) Width 2200mm.

(2) Product thickness: 4, 6, 8, 10mm.

(3) Vacuum calibrator: 1 set.

(4) Vacuum suck plate: 3 sets.

(5) Vacuum pump: 1 set.

(6) Temperature control: 1 set.

(7) First taking roller: 1 set.

(8) Type: 10 rubber rolls.

(9) Roll size: Ø250 x 2250mm.

(10) Drive motor: servo motor.

(11) Controller: by air pressure.

(12) Oven unit: 1 set.

(13) Type ceramics electric heater.

(14) Temperature control: 8 zones.

(15) Sticking film unit: 1 set.

(16) Divide into parts unit: 1 set.

(17) Second taking roller unit: 1 set.

(18) Type: 4 rubber pulling rolls.

(19) Drive motor: servo motor.

(20) Roll size: Ø250 x 2250mml.

(21) Cross cutting unit: 1 set.

(22) Stacker: 1 set.

(23) Electric controller cabinet: Adopt SSR and PLC system.

(24) Total weight: 55tons.

(25) Occupied ground area: 30000mm x 4125mm x 2095mm (L x W x H).

Shang Ta Chia Industrial Co., Ltd.

  • Taiwan
  • No. 23, Lane 466, Sec.9, Xiang Shang Rd., Wu Chi Dist., Taichung City 43547, Taiwan
  • 886-4-26302231
  • 886-4-26302771