Description :

Fully automatic oil hydraulic die casting machine, allowing one man to control the operation of multiple units for saving labor cost.
Mold opening and closing allow three options at Fast, Medium and Slow for operation as desired.
Fast injection speed due to power jet to provide die casting conditions with finished products giving excellent filling rate, and working conditions may be changed as desired depending on the nature of the metal mold.
Highly precision machined, this machine allows precision manufacturing with each and all parts strictly of top selection, all properly treated for the optimal duration and withstanding performance.
Correct and fast assembly of the metal molds thanks to the use of oil hydraulic motor to set up the closing height of the metal molds to save the time otherwise required by fastening the screws in the conventional models; also perfect for production of small scale with multiple molds.
Electric box adapted to the rear of the machine for emergency stop and manual operation mode.
Allowing (dis) mounting the molds at slow speed to ensure precision adaptation between the mold and the injection nozzle.
Expanded working oil canister and cooler capacities to prevent excessively rising of the working temperature of oil (oil thermometer attached).
To prevent spillage and escaping of melting liquid from the cuts of the metal molds, no injection will be allowed before the confirmation of properly closed metal molds. Double safety mechanism is adapted to prevent any accident due to failure of the electric components, and protection to fe

Specification :

1. Clamping system:

(1) Locking force ton: 65.

(2) Tie bar diameter mm: 65.

(3) Die platen size (H x V) mm: 540 x 540.

(4) Between tie bar (H x V) mm: 335 x 335.

(5) Die plunger stroke mm: 220.

(6) Thickness of die mm: 140 ~ 355.

2. Injection system:

(1) Injection force ton: 5.1.

(2) Injection stroke mm: 150.

(3) Plunger tip diameter mm: 50.

(4) Casting capacity (70%) kg: 1.4.

(5) Melting pot capacity kg: 370.

(6) Nozzle to center mm: -55.

(7) Casting area cm2: 195.

(8) Casting pressure kg/ cm2: 257.

3. Ejector force:

(1) Ejector force ton: 5.7.

(2) Ejector stroke mm: 65.5.

4. Hydraulic system:

(1) Casting cycle cycle/min: 12.

(2) Unit pressure kg/ cm2: 90.

(3) Oil tank capacity litter: 200.

5. Electrical system:

(1) Motor style hp: 15.

(2) Electric and power V/Hz 220V~380V / 50~60Hz.

6. Machine measure: Overall dimensions mm: 3930 x 1250 x 2250.

7. Machine net weight ton: 5.