Far East Machinery Co. Ltd.

Taiwan Manufacturers, Exporters.

Products

CNC Lathes

cnc lathes

  • Model No: HL-25DM
  • Factory Location: Taiwan
  • Sample Request: No
  • Target Markets: Worldwide

Detail Information

Description :

1. Description: NEW green machine, CNC Lathe. Unique air clamping and unclamping system without hydraulic system.
Revolutionary 23 station power turret minimizes tool set-up time and increase productivity.
2. Features:
(1) Innovation double disc turret, OD 12 tools, ID 11 tools.
(2) All ID tools position can be equipped with power tool.
(3) Biggest Machining Capacity in same size machines.
(4) Max swing: 515 mm, Max turning length: 570 mm.
(5) Max turning diameter: 350 mm.
(6) Bigger three pieces curvy coupling, higher rigidity.
(7) Innovative tooling diagram design, same tool for front side
and rear side machining.
(8) On servo motor driven two turret discs, tool position
changing is faster and higher accuracy.
(9) Innovative pneumatic-driven clamping system, no hydraulic less pollution.
(10) Built-in parts catcher,no interference when door opens and closes.
(11) Smaller turret swing in same size power turret, less
tooling interference.

Specification :

Capacity: 1. Max. swing ∮ 515 mm. 2. Max. turning diameter ∮ 350 mm. 3. Max. turning length ∮580 mm. 4. Bar capacity ∮51.5 mm. Travel: 1. X axis ∮177 mm. 2. Z axis ∮600 mm. Spindle: 1. Spindle speed range 4800 rpm. 2. Chuck size 8". 3. Type of spindle nose A2-6. 4. Through spindle hole diameter ∮61 mm. 5. Front bearing ID / OD ∮100 x ∮150 mm. 6. Rear bearing ID / OD ∮90 x ∮140 mm. 7. Spindle motor type FANUC αP22i. 8. Spindle motor power (Con. / 30min) 11 / 15 kW. 9. Max. spindle torque 24.3 kgm. 10. Max. spindle speed torque rpm 600rpm. Turret: 1. Number of tool stations 12(OD) / 11(ID) tools. 2. Shank height for square tool 20 x 20 mm. 3. Shank diameter for boring bar ∮40 mm. 4. Power tool shank diameter ∮20 mm. 5. Power tool speed range at Axial 3000 rpm. 6. Power tool speed range at Radial units 3000 rpm. 7. Power tool motor type FANUC α2. 8. Power tool motor power 2.2 / 3.7 kW. Feedrate: 1. X axis rapid traverse 20000mm / min. 2. Z axis rapid traverse 24000mm / min. Dimension: 1. Width 2400 mm. 2. Depth 1550 mm. 3. Height 1600 mm. 4. Weight 3350 kgs.

Far East Machinery Co. Ltd.

  • Taiwan