BJTEK Navigation Inc.

Taiwan Manufacturers, Exporters.

Products

External Active GPS Antennas

external active gps antenna

  • Model No: GA60
  • Factory Location: Taiwan
  • Sample Request: No
  • Target Markets: Worldwide

Detail Information

Description :

AVL system and project vehicles management special-purpose GPS antenna.

The antenna system GA-60 is the integration of the high performance GPS patch antenna and a low noise amplifier into state-of-the-art low a very low profile/extremely compact/fully waterproof antenna signal enclosure. When connected to a GPS receiver with +2.5~ 5.5V DC antenna powers it provides excellent signal amplification and out-band-rejection for that receiver.

Features:
GPS antenna with double threaded bolts and through holes for cable routing with course & fine treaded pitch locking for wing-nut fastener and lock-nut to prevent vibrations and un-authorize removal.

Specification :

1. Specifications: (1) Construction: polycarbonate radome,detachable cable/connector for easy mount, rubber-o-ring between top radome and screw base for waterproof. (2) Dimension: 47.2mm(dia.) x 38mm(H). (3) Weight: 100grams (with 5M cable & connector). (4) Color: standard in black. (5) Mounting: bulkhead mount with 0.46 inch threaded wing nut. 2. Cable & connector: (1) RF cable: 5 meter RG174/U (standard) other length (optional) (2) Pulling strength: 6 Kg @ 5sec. (3) Molded plastic on connector end for strain relief. (4) Connector available: SMA/SMB/MCX/MMCX/GT5/FME. (5) Optional: universal connector adapter (FME to TNC/ BNC/ SMA/ SMB/ MCX). 3. Antenna element: (1) Center frequency: 1575.42 MHz +/-1.023MHz. (2) Polarization: R.H.C.P. (right handed circular polarization). (3) Absolute gain @ zenith: +5 dBic typ. (4) Gain @ 10o elevation: -1 dBi typical. (5) Axial ratio: 3 dB max. (6) Output VSWR: 1.5 max. (7) Output impedance: 50 ohm. 4. Low noise amplifier: (1) Center frequency: 1575.42 MHz. (2) Power gain: 28db +/-4.5db. (3) Bandwidth: 10MHz min. (4) Noise figure: 1.5 min. (5) Outer band attenuation: 3 dB max. (6) Supply voltages: 2.5~5.5V DC. (7) Current consumption: 2.5V:6.6mA/ 3V: 8.6mA/ 4V: 12.6mA/ 5V: 16.6mA. 5. Output impedance: 50W ohm. 6. Overall performance: (antenna element, LNA & coax cable). 7. Center frequency: 1575.42 Mhz. 8. Gain: at 90o 30 ± 4.5dBi (cable loss). Note:1. 9. Mounted on the 60mm x 60mm square ground plane. 10. Oise figure: 2.0 max. 11. Axial ratio: 3 dB max. 12. Bandwidth: 10MHz min. 13. VSWR: 2.0 max.

BJTEK Navigation Inc.

  • Taiwan