657295069

Ares Machinery Co., Ltd.

Tel:886-4-24925555       Fax:886-4-24966959
Address:No. 256, Tu Cheng Rd., Da-Li Dist., Taichung City 412, Taiwan

Products

5-axis CNC Tapping Center

5-axis-CNC-Tapping-Center

  • Model No: A5X404
  • Factory Location: Taiwan
  • Sample Request: No
  • Target Markets: Worldwide

Detail Information

Description :

◾Spindle speed STD. 8000rpm
OPT. 12000rpm
15000rpm
◾Spindle motor Mitsubishi 7.5/5.5 kw
Fanuc 7.5/5.5 kw
Siemens 10.5/7.0 kw
◾Rapid traverse X,Y,Z: 48/48/48 m/min
◾X axes travel 400mm
◾Y axes travel 500mm
◾Z axes travel 450mm
◾Tools capacity 24+1 tools
◾ATC time (T-T) 2.4sec
◾Table size Ø250 mm / Ø320 (OP) mm

Specification :

  UnitA5X404
Table size mmØ250 / Ø320 (OP)
Max. Table load kgf75
Max. Workpiece dimennsion (Ø × height) mmØ448 × 250
Min. indexing precision of C axis rotary degree0.001
Cumulative indexing precision of C axis sec15
C axis repeatability accuracy sec6
Slope angle of A axis degree+120 / - 40
Cumulative indexing precision of A axis sec45
A axis repeatability accuracy sec8
Max. Speeds for A, C axis rpm13.3 / 22.2
X, Y, Z axis travel mm400 × 500 × 450
3 axes rapid traverse m/min48 / 48 / 48
3 axes bidirectional accuracy of positioning mmVDI 3441
3 axes bidirectional repeatability of positioning mmVDI 3441
Spindle speeds rpm8000
Spindle taper  BT40
Pull stud  MAS 403 P40T-1(45° )
Spindle driving  Direct-drive
Spindle nose to table mm40 ~ 490
Spindle center to Z path mm570
Spindle motorMitsubishikw7.5 / 5.5
Fanuckw 7.5 / 5.5
Siemenskw10.5 / 7.0
X drive motorMitsubishikw1.5
Fanuckw 1.6
Siemenskw2.3
Y drive motorMitsubishikw2.2
Fanuckw 2.7
Siemenskw2.3
Z drive motorMitsubishikw3.0
Fanuckw 3.0
Siemenskw3.3
A drive motorMitsubishikw3.5
Fanuckw 4.0
Siemenskw3.3
C drive motorMitsubishikw1.5
Fanuckw 1.6
Siemenskw2.3
Tools capacity tools24+1
Max. tool weight kg5
Max. tool length mm250
Max. tool diameter (alternate pocket empty) mm80 (120)
ATC time (T-T) sec2.4
Tool Change type  Arm type
Tank volume L260
Coolant pump rate W600 × 2 pcs
Flow rate L/min136
Chip flush type  Flushing type
Auto. Chip conveyor  OP
Net weight kg4300
Floor space mm2170 × 3032 × 2657

 

  • Tool change time supplied with standard 60Hz power. For electrical requirements other than this standard, please contact one of our personnel.
  • The company reserves the right to modify the specifications / design, subject to change without further notice.
    Actual specifications, based on order content.

Ares Machinery Co., Ltd.

  • Taiwan
  • No. 256, Tu Cheng Rd., Da-Li Dist., Taichung City 412, Taiwan
  • 886-4-24925555
  • 886-4-24966959
  • 657295069