ANSON Hydraulics Industrial Co., Ltd.

Manufacturer of Hydraulics Pumps and Hydraulic Power Units.

Products

New Variable Displacement Single Vane Pumps

variable displacement vane pump

  • Model No: VP5F
  • Factory Location: Taiwan
  • Sample Request: No
  • Target Markets: Worldwide

Detail Information

Description :

1. High efficiency operation with high pressure: under the conditions of pressure 140 bar, the VP5 pump is stable and highly efficient. Due to our improvement disgns "THREE POINT RING" support systems.
2. No vibration and quiet: the cam ring is specifically designed to have a special curve so the noise level [dB] is very low, even in the high pressure operations.
3. Sharp characteristics and quick response: quick response is displayed in both "ON-OFF" control of operation, due to use special design "BIAS PISTON" stable and accurate operation can be attained in an instant.
4. Stable flow: due to use new design "pressure balance mehanism" the output flow pressure control systems, the output flow is very stable even in the high pressure ranges.
5. Energy saving type: power loss has been reduced further by application of our highly advanced precision machining
technology to assure the same high efficiency performance.
AS the "VP5" series with many new mechanisms of our improvement designs. And the power loss at the "dead head" has been reduced by a large degree.
6. Easy testing and maintenance:
pressure adjusting screw, and the volume adjusting screw
were located at the same side, and ensure easy testing at a glance.

Specification :

Variable Displacement Vane Pumps

VP※F Series-Single Pumps Model Code

VP5F-A-5-50S
Code
Frame size
Outlet flow
(at 3.5bar,1800 r/min)
Operating pressure rangeDesignShafts code
A
Outlet Flow L/min
(Geometric displacement cm3/rev)
B
Outlet Flow L/min
(Geometric displacement cm3/rev)
CodePressure range
(bar)
VP530 (16)40 (22)215~3550Omit:
Woodruff key (VP5)
Straight key (VP6~7)


S:
Splined Shaft
VP654 (30)70 (39)320~70
VP7120 (67)-450~105
F:
Flange mounting
●B code(40 & 70 L/min)
maximum pressure 105bar

Factory setting Qmax.
570~140
Factory setting Pmin.

※Pumps Speed Limits
Minimum speed:800 r/min
Maximum speed:1800 r/min

ANSON Hydraulics Industrial Co., Ltd.

  • Taiwan
  • No. 2, Wugong 2nd Rd., Wufeng Dist., Taichung City 41353, Taiwan
  • 886-4-23335286
  • 886-4-23335298