Description :
Increased width on the column bottom, combined with box type structure, greatly upgrades rigidity and stability during machining.
Box slide ways on the 3 axes are high frequency hardened. Way surfaces are coated with Turcite-B and precision scraped.
Extra wide slide ways and distance between slide ways and distance between at low speed travel while ensuring high stability.
The major structures are manufactured from Meehanite cast iron with scientific rib reinforcement. This reduces structural deformation to a minimum.
Specification :
Contents | Items | Units | SMV - 1100 |
---|
Travel | Box way | | |
X Axis Travel | mm | 1100 |
Y Axis Travel | mm | 600/650(OPT) |
Z Axis Travel | mm | 600 |
Distance From Table Surface to Spindle nose | mm | 120-720 |
Table | Table area | mm | 1250 x 650 |
Max. Load of table | kg | 880 |
T- slot | mm | 5 x 18 x 125 |
Spindle | Spindle taper | - | BT40/BT50(OPT.) |
Spindle Speed | RPM | 8000/6000 |
Spindle Drive | - | Timing belt |
Spindle Cooling | - | Oil cooler |
Spindle Motor | kw | 7.5/11kw(15HP) |
Feed Rate | Rapid Traverse X | m/min | 18 |
Rapid Traverse Y | m/min | 18 |
Rapid Traverse Z | m/mm | 15 |
Cutting feed rate | mm/min | 1-10000 |
X / Y/ Z Axes motor output(FANUC) | kw | 2.5 / 2.5 / 2.5 |
X / Y/ Z Axes motor output (MITSUBISHI) | kw | 3.5 / 3.5 / 3.5 |
A.T.C. | Magazine type (BT40) | | Carousel | Arm |
Tool Magazine capacity | pcs | 16 | 24 |
Max. tool diameter | mm | 100/150 | 80/150 |
Max. tool length | mm | 300 | 300 |
Max. tool weight | kg | 7 | 7 |
Tool Selection | - | Fixed type | Random |
others | Power consumption | KVA | 20 |
Floor space (length) | mm | 2890 |
Floor space (width) | mm | 2240 |
Floor space (height) | mm | 2600 |
machine weight | kg | 7500 |
Contents | Items | Units | SMV - 1100 |
---|
Travel | Box way | | |
X Axis Travel | mm | 1100 |
Y Axis Travel | mm | 600/650(OPT) |
Z Axis Travel | mm | 600 |
Distance From Table Surface to Spindle nose | mm | 120-720 |
Table | Table area | mm | 1250 x 650 |
Max. Load of table | kg | 880 |
T- slot | mm | 5 x 18 x 125 |
Spindle | Spindle taper | - | BT40/BT50(OPT.) |
Spindle Speed | RPM | 8000/6000 |
Spindle Drive | - | Timing belt |
Spindle Cooling | - | Oil cooler |
Spindle Motor | kw | 7.5/11kw(15HP) |
Feed Rate | Rapid Traverse X | m/min | 18 |
Rapid Traverse Y | m/min | 18 |
Rapid Traverse Z | m/mm | 15 |
Cutting feed rate | mm/min | 1-10000 |
X / Y/ Z Axes motor output(FANUC) | kw | 2.5 / 2.5 / 2.5 |
X / Y/ Z Axes motor output (MITSUBISHI) | kw | 3.5 / 3.5 / 3.5 |
A.T.C. | Magazine type (BT40) | | Carousel | Arm |
Tool Magazine capacity | pcs | 16 | 24 |
Max. tool diameter | mm | 100/150 | 80/150 |
Max. tool length | mm | 300 | 300 |
Max. tool weight | kg | 7 | 7 |
Tool Selection | - | Fixed type | Random |
others | Power consumption | KVA | 20 |
Floor space (length) | mm | 2890 |
Floor space (width) | mm | 2240 |
Floor space (height) | mm | 2600 |
machine weight | kg | 7500 |
Contents | Items | Units | SMV - 1100 |
---|
Travel | Box way | | |
X Axis Travel | mm | 1100 |
Y Axis Travel | mm | 600/650(OPT) |
Z Axis Travel | mm | 600 |
Distance From Table Surface to Spindle nose | mm | 120-720 |
Table | Table area | mm | 1250 x 650 |
Max. Load of table | kg | 880 |
T- slot | mm | 5 x 18 x 125 |
Spindle | Spindle taper | - | BT40/BT50(OPT.) |
Spindle Speed | RPM | 8000/6000 |
Spindle Drive | - | Timing belt |
Spindle Cooling | - | Oil cooler |
Spindle Motor | kw | 7.5/11kw(15HP) |
Feed Rate | Rapid Traverse X | m/min | 18 |
Rapid Traverse Y | m/min | 18 |
Rapid Traverse Z | m/mm | 15 |
Cutting feed rate | mm/min | 1-10000 |
X / Y/ Z Axes motor output(FANUC) | kw | 2.5 / 2.5 / 2.5 |
X / Y/ Z Axes motor output (MITSUBISHI) | kw | 3.5 / 3.5 / 3.5 |
A.T.C. | Magazine type (BT40) | | Carousel | Arm |
Tool Magazine capacity | pcs | 16 | 24 |
Max. tool diameter | mm | 100/150 | 80/150 |
Max. tool length | mm | 300 | 300 |
Max. tool weight | kg | 7 | 7 |
Tool Selection | - | Fixed type | Random |
others | Power consumption | KVA | 20 |
Floor space (length) | mm | 2890 |
Floor space (width) | mm | 2240 |
Floor space (height) | mm | 2600 |
machine weight | kg | 7500 |
Contents | Items | Units | SMV - 1100 |
---|
Travel | Box way | | |
X Axis Travel | mm | 1100 |
Y Axis Travel | mm | 600/650(OPT) |
Z Axis Travel | mm | 600 |
Distance From Table Surface to Spindle nose | mm | 120-720 |
Table | Table area | mm | 1250 x 650 |
Max. Load of table | kg | 880 |
T- slot | mm | 5 x 18 x 125 |
Spindle | Spindle taper | - | BT40/BT50(OPT.) |
Spindle Speed | RPM | 8000/6000 |
Spindle Drive | - | Timing belt |
Spindle Cooling | - | Oil cooler |
Spindle Motor | kw | 7.5/11kw(15HP) |
Feed Rate | Rapid Traverse X | m/min | 18 |
Rapid Traverse Y | m/min | 18 |
Rapid Traverse Z | m/mm | 15 |
Cutting feed rate | mm/min | 1-10000 |
X / Y/ Z Axes motor output(FANUC) | kw | 2.5 / 2.5 / 2.5 |
X / Y/ Z Axes motor output (MITSUBISHI) | kw | 3.5 / 3.5 / 3.5 |
A.T.C. | Magazine type (BT40) | | Carousel | Arm |
Tool Magazine capacity | pcs | 16 | 24 |
Max. tool diameter | mm | 100/150 | 80/150 |
Max. tool length | mm | 300 | 300 |
Max. tool weight | kg | 7 | 7 |
Tool Selection | - | Fixed type | Random |
others | Power consumption | KVA | 20 |
Floor space (length) | mm | 2890 |
Floor space (width) | mm | 2240 |
Floor space (height) | mm | 2600 |
machine weight | kg | 7500 |
Contents | Items | Units | SMV - 1100 |
---|
Travel | Box way | | |
X Axis Travel | mm | 1100 |
Y Axis Travel | mm | 600/650(OPT) |
Z Axis Travel | mm | 600 |
Distance From Table Surface to Spindle nose | mm | 120-720 |
Table | Table area | mm | 1250 x 650 |
Max. Load of table | kg | 880 |
T- slot | mm | 5 x 18 x 125 |
Spindle | Spindle taper | - | BT40/BT50(OPT.) |
Spindle Speed | RPM | 8000/6000 |
Spindle Drive | - | Timing belt |
Spindle Cooling | - | Oil cooler |
Spindle Motor | kw | 7.5/11kw(15HP) |
Feed Rate | Rapid Traverse X | m/min | 18 |
Rapid Traverse Y | m/min | 18 |
Rapid Traverse Z | m/mm | 15 |
Cutting feed rate | mm/min | 1-10000 |
X / Y/ Z Axes motor output(FANUC) | kw | 2.5 / 2.5 / 2.5 |
X / Y/ Z Axes motor output (MITSUBISHI) | kw | 3.5 / 3.5 / 3.5 |
A.T.C. | Magazine type (BT40) | | Carousel | Arm |
Tool Magazine capacity | pcs | 16 | 24 |
Max. tool diameter | mm | 100/150 | 80/150 |
Max. tool length | mm | 300 | 300 |
Max. tool weight | kg | 7 | 7 |
Tool Selection | - | Fixed type | Random |
others | Power consumption | KVA | 20 |
Floor space (length) | mm | 2890 |
Floor space (width) | mm | 2240 |
Floor space (height) | mm | 2600 |
machine weight | kg | 7500 |
Contents | Items | Units | SMV - 1100 |
---|
Travel | Box way | | |
X Axis Travel | mm | 1100 |
Y Axis Travel | mm | 600/650(OPT) |
Z Axis Travel | mm | 600 |
Distance From Table Surface to Spindle nose | mm | 120-720 |
Table | Table area | mm | 1250 x 650 |
Max. Load of table | kg | 880 |
T- slot | mm | 5 x 18 x 125 |
Spindle | Spindle taper | - | BT40/BT50(OPT.) |
Spindle Speed | RPM | 8000/6000 |
Spindle Drive | - | Timing belt |
Spindle Cooling | - | Oil cooler |
Spindle Motor | kw | 7.5/11kw(15HP) |
Feed Rate | Rapid Traverse X | m/min | 18 |
Rapid Traverse Y | m/min | 18 |
Rapid Traverse Z | m/mm | 15 |
Cutting feed rate | mm/min | 1-10000 |
X / Y/ Z Axes motor output(FANUC) | kw | 2.5 / 2.5 / 2.5 |
X / Y/ Z Axes motor output (MITSUBISHI) | kw | 3.5 / 3.5 / 3.5 |
A.T.C. | Magazine type (BT40) | | Carousel | Arm |
Tool Magazine capacity | pcs | 16 | 24 |
Max. tool diameter | mm | 100/150 | 80/150 |
Max. tool length | mm | 300 | 300 |
Max. tool weight | kg | 7 | 7 |
Tool Selection | - | Fixed type | Random |
others | Power consumption | KVA | 20 |
Floor space (length) | mm | 2890 |
Floor space (width) | mm | 2240 |
Floor space (height) | mm | 2600 |
machine weight | kg | 7500 |
Contents | Items | Units | SMV - 1100 |
---|
Travel | Box way | | |
X Axis Travel | mm | 1100 |
Y Axis Travel | mm | 600/650(OPT) |
Z Axis Travel | mm | 600 |
Distance From Table Surface to Spindle nose | mm | 120-720 |
Table | Table area | mm | 1250 x 650 |
Max. Load of table | kg | 880 |
T- slot | mm | 5 x 18 x 125 |
Spindle | Spindle taper | - | BT40/BT50(OPT.) |
Spindle Speed | RPM | 8000/6000 |
Spindle Drive | - | Timing belt |
Spindle Cooling | - | Oil cooler |
Spindle Motor | kw | 7.5/11kw(15HP) |
Feed Rate | Rapid Traverse X | m/min | 18 |
Rapid Traverse Y | m/min | 18 |
Rapid Traverse Z | m/mm | 15 |
Cutting feed rate | mm/min | 1-10000 |
X / Y/ Z Axes motor output(FANUC) | kw | 2.5 / 2.5 / 2.5 |
X / Y/ Z Axes motor output (MITSUBISHI) | kw | 3.5 / 3.5 / 3.5 |
A.T.C. | Magazine type (BT40) | | Carousel | Arm |
Tool Magazine capacity | pcs | 16 | 24 |
Max. tool diameter | mm | 100/150 | 80/150 |
Max. tool length | mm | 300 | 300 |
Max. tool weight | kg | 7 | 7 |
Tool Selection | - | Fixed type | Random |
others | Power consumption | KVA | 20 |
Floor space (length) | mm | 2890 |
Floor space (width) | mm | 2240 |
Floor space (height) | mm | 2600 |
machine weight | kg | 7500 |
Contents | Items | Units | SMV - 1100 |
---|
Travel | Box way | | |
X Axis Travel | mm | 1100 |
Y Axis Travel | mm | 600/650(OPT) |
Z Axis Travel | mm | 600 |
Distance From Table Surface to Spindle nose | mm | 120-720 |
Table | Table area | mm | 1250 x 650 |
Max. Load of table | kg | 880 |
T- slot | mm | 5 x 18 x 125 |
Spindle | Spindle taper | - | BT40/BT50(OPT.) |
Spindle Speed | RPM | 8000/6000 |
Spindle Drive | - | Timing belt |
Spindle Cooling | - | Oil cooler |
Spindle Motor | kw | 7.5/11kw(15HP) |
Feed Rate | Rapid Traverse X | m/min | 18 |
Rapid Traverse Y | m/min | 18 |
Rapid Traverse Z | m/mm | 15 |
Cutting feed rate | mm/min | 1-10000 |
X / Y/ Z Axes motor output(FANUC) | kw | 2.5 / 2.5 / 2.5 |
X / Y/ Z Axes motor output (MITSUBISHI) | kw | 3.5 / 3.5 / 3.5 |
A.T.C. | Magazine type (BT40) | | Carousel | Arm |
Tool Magazine capacity | pcs | 16 | 24 |
Max. tool diameter | mm | 100/150 | 80/150 |
Max. tool length | mm | 300 | 300 |
Max. tool weight | kg | 7 | 7 |
Tool Selection | - | Fixed type | Random |
others | Power consumption | KVA | 20 |
Floor space (length) | mm | 2890 |
Floor space (width) | mm | 2240 |
Floor space (height) | mm | 2600 |
machine weight | kg | 7500 |
Contents | Items | Units | SMV - 1100 |
---|
Travel | Box way | | |
X Axis Travel | mm | 1100 |
Y Axis Travel | mm | 600/650(OPT) |
Z Axis Travel | mm | 600 |
Distance From Table Surface to Spindle nose | mm | 120-720 |
Table | Table area | mm | 1250 x 650 |
Max. Load of table | kg | 880 |
T- slot | mm | 5 x 18 x 125 |
Spindle | Spindle taper | - | BT40/BT50(OPT.) |
Spindle Speed | RPM | 8000/6000 |
Spindle Drive | - | Timing belt |
Spindle Cooling | - | Oil cooler |
Spindle Motor | kw | 7.5/11kw(15HP) |
Feed Rate | Rapid Traverse X | m/min | 18 |
Rapid Traverse Y | m/min | 18 |
Rapid Traverse Z | m/mm | 15 |
Cutting feed rate | mm/min | 1-10000 |
X / Y/ Z Axes motor output(FANUC) | kw | 2.5 / 2.5 / 2.5 |
X / Y/ Z Axes motor output (MITSUBISHI) | kw | 3.5 / 3.5 / 3.5 |
A.T.C. | Magazine type (BT40) | | Carousel | Arm |
Tool Magazine capacity | pcs | 16 | 24 |
Max. tool diameter | mm | 100/150 | 80/150 |
Max. tool length | mm | 300 | 300 |
Max. tool weight | kg | 7 | 7 |
Tool Selection | - | Fixed type | Random |
others | Power consumption | KVA | 20 |
Floor space (length) | mm | 2890 |
Floor space (width) | mm | 2240 |
Floor space (height) | mm | 2600 |
machine weight | kg | 7500 |
Contents | Items | Units | SMV - 1100 |
---|
Travel | Box way | | |
X Axis Travel | mm | 1100 |
Y Axis Travel | mm | 600/650(OPT) |
Z Axis Travel | mm | 600 |
Distance From Table Surface to Spindle nose | mm | 120-720 |
Table | Table area | mm | 1250 x 650 |
Max. Load of table | kg | 880 |
T- slot | mm | 5 x 18 x 125 |
Spindle | Spindle taper | - | BT40/BT50(OPT.) |
Spindle Speed | RPM | 8000/6000 |
Spindle Drive | - | Timing belt |
Spindle Cooling | - | Oil cooler |
Spindle Motor | kw | 7.5/11kw(15HP) |
Feed Rate | Rapid Traverse X | m/min | 18 |
Rapid Traverse Y | m/min | 18 |
Rapid Traverse Z | m/mm | 15 |
Cutting feed rate | mm/min | 1-10000 |
X / Y/ Z Axes motor output(FANUC) | kw | 2.5 / 2.5 / 2.5 |
X / Y/ Z Axes motor output (MITSUBISHI) | kw | 3.5 / 3.5 / 3.5 |
A.T.C. | Magazine type (BT40) | | Carousel | Arm |
Tool Magazine capacity | pcs | 16 | 24 |
Max. tool diameter | mm | 100/150 | 80/150 |
Max. tool length | mm | 300 | 300 |
Max. tool weight | kg | 7 | 7 |
Tool Selection | - | Fixed type | Random |
others | Power consumption | KVA | 20 |
Floor space (length) | mm | 2890 |
Floor space (width) | mm | 2240 |
Floor space (height) | mm | 2600 |
machine weight | kg | 7500 |
please note the attached file.