658051768

TANSHING ACCURATE INDUSTRIAL CO., LTD.

Taiwan 4th & 5th Axis Rotary Table, Pneumatic & Hydraulic Indexing Table Manufacturer

Products

5 Axis Rotary Table (CNC Tilting Table)

5-Axis-Rotary-Table

  • Model No: TRNC-125H/TRNC-170C/TRNC-210C/TRNC-255A/TRNC-255B
  • Factory Location: Taiwan
  • Sample Request: No
  • Target Markets: Worldwide

Detail Information

Description :

Absolute value motor are recommended for tilting axis.

Specification :

TRNC-125H
Specifications / ModelUnitTRNC-125H
Worktable DiameterØmmØ125
Table HeightHorizontalmm236
Center Height90°mm150
Overall Height90°mm260
Center Bore DiameterØmmØ25H7
Through-Hole DiameterØmmØ13
Width Of T-Slotmm12H7
Width Of Guide Blockmm14H7
Tilting Angledeg.-40°~+120°
AxisRotationInclination
Minimum Input Incrementdeg.0.001°
Indexing Accuracysec.40"60"
Repeatabilitysec.4"
Servo Motor
(Model As Required)
FANUC αiF 2αiF 2
MELDAS HF-75THF-75T
Speed Reduction Ratio 1/901/180
Table Rotation Speedr.p.m55.527.7
Allowable Inertia Forcekg-cm-sec22
Allowable Turntable Torquekg-m8
Drive Pressure / Methodkg/cm25 / Pneumatic35 / Hydraulic
Clamping Torquekg-m8.517
Allowable Load Capacitykg50
0°~90°35
Allowable Workpiece DiameterØmmØ125
Net Weight (Motor Excluded)kg106
Note:
1. "★" Means with encoder of HEIDENHAIN ECN-2XX series.
2. "◎" Means With built-in Pneumatic/Hydraulic converter.
3. The tilting shaft on model TRNC-170A and TRNC-210A provides a choice of electric side mounting, as TRNC-125H.(L type)


 

TRNC-170C
Specifications / ModelUnitTRNC-170C
Worktable DiameterØmmØ170
Table HeightHorizontalmm280
Center Height90°mm190
Overall Height90°mm380
Center Bore DiameterØmmØ35H7
Through-Hole DiameterØmmØ35
Width Of T-Slotmm12H7
Width Of Guide Blockmm18H7
Tilting Angledeg.-35°~+120°
AxisRotationInclination
Minimum Input Incrementdeg.0.001°
Indexing Accuracysec.20"60"
Repeatabilitysec.4"
Servo Motor
(Model As Required)
FANUC αiF 4αiF 4
MELDAS HF-104THF-104T
Speed Reduction Ratio 1/901/120
Table Rotation Speedr.p.m44.433.3
Allowable Inertia Forcekg-cm-sec24.9
Allowable Turntable Torquekg-m15
Drive Pressure / Methodkg/cm25 / Pneumatic5 / Hydraulic
Clamping Torquekg-m8.58.5
Allowable Load Capacitykg50
0°~90°35
Allowable Workpiece DiameterØmmØ170
Net Weight (Motor Excluded)kg126
Note:
1. "★" Means with encoder of HEIDENHAIN ECN-2XX series.
2. "◎" Means With built-in Pneumatic/Hydraulic converter.
3. The tilting shaft on model TRNC-170A and TRNC-210A provides a choice of electric side mounting, as TRNC-125H.(L type)


 

TRNC-210C
Specifications / ModelUnitTRNC-210C
Worktable DiameterØmmØ210
Table HeightHorizontalmm280
Center Height90°mm190
Overall Height90°mm380
Center Bore DiameterØmmØ45H7
Through-Hole DiameterØmmØ45
Width Of T-Slotmm12H7
Width Of Guide Blockmm18H7
Tilting Angledeg.-35°~+110°
AxisRotationInclination
Minimum Input Incrementdeg.0.001°
Indexing Accuracysec.20"60"
Repeatabilitysec.4"
Servo Motor
(Model As Required)
FANUC αiF 4αiF 4
MELDAS HF-104THF-104T
Speed Reduction Ratio 1/901/120
Table Rotation Speedr.p.m44.433.3
Allowable Inertia Forcekg-cm-sec24.9
Allowable Turntable Torquekg-m15
Drive Pressure / Methodkg/cm25 / Pneumatic5 / Pneumatic
Clamping Torquekg-m8.58.5
Allowable Load Capacitykg50
0°~90°35
Allowable Workpiece DiameterØmmØ210
Net Weight (Motor Excluded)kg131
Note:
1. "★" Means with encoder of HEIDENHAIN ECN-2XX series.
2. "◎" Means With built-in Pneumatic/Hydraulic converter.
3. The tilting shaft on model TRNC-170A and TRNC-210A provides a choice of electric side mounting, as TRNC-125H.(L type)


 

TRNC-255A
Specifications / ModelUnitTRNC-255A
Worktable DiameterØmmØ255
Table HeightHorizontalmm400
Center Height90°mm400
Overall Height90°mm550
Center Bore DiameterØmmØ50H7
Through-Hole DiameterØmm-
Width Of T-Slotmm12H7
Width Of Guide Blockmm18H7
Tilting Angledeg.-30°~+120°
AxisRotationInclination
Minimum Input Incrementdeg.0.001°
Indexing Accuracysec.15" (Gear)
★20" (Belt)
★20" (Belt)
Repeatabilitysec.4"
Servo Motor
(Model As Required)
FANUC αiF4/ αiF 8
(recommend)
αiF 8
MELDAS HF-104THF-154T
Speed Reduction Ratio 1/1201/120
Table Rotation Speedr.p.m2525
Allowable Inertia Forcekg-cm-sec26.4
Allowable Turntable Torquekg-m16
Drive Pressure / Methodkg/cm25 / Pneumatic5 / Pneumatic
Clamping Torquekg-m◎50◎50
Allowable Load Capacitykg100
0°~90°50
Allowable Workpiece DiameterØmmØ255
Net Weight (Motor Excluded)kg599
Note:
1. "★" Means with encoder of HEIDENHAIN ECN-2XX series.
2. "◎" Means With built-in Pneumatic/Hydraulic converter.
3. The tilting shaft on model TRNC-170A and TRNC-210A provides a choice of electric side mounting, as TRNC-125H.(L type)


 

TRNC-255B
Specifications / ModelUnitTRNC-255B
Worktable DiameterØmmØ255
Table HeightHorizontalmm330
Center Height90°mm235
Overall Height90°mm388
Center Bore DiameterØmmØ100H7
Through-Hole DiameterØmmØ100
Width Of T-Slotmm12H7
Width Of Guide Blockmm18H7
Tilting Angledeg.-40°~+120°
AxisRotationInclination
Minimum Input Incrementdeg.0.001°
Indexing Accuracysec.15"★15"60"★20"
Repeatabilitysec.4"
Servo Motor
(Model As Required)
FANUC αiF 4αiF 8αiF 8
MELDAS HF-104THF-154T
Speed Reduction Ratio 1/901/180
Table Rotation Speedr.p.m44.433.316.6
Allowable Inertia Forcekg-cm-sec211
Allowable Turntable Torquekg-m48
Drive Pressure / Methodkg/cm235 / Pneumatic35 / Pneumatic
Clamping Torquekg-m4646
Allowable Load Capacitykg140
0°~90°80
Allowable Workpiece DiameterØmmØ255
Net Weight (Motor Excluded)kg400
Note:
1. "★" Means with encoder of HEIDENHAIN ECN-2XX series.
2. "◎" Means With built-in Pneumatic/Hydraulic converter.
3. The tilting shaft on model TRNC-170A and TRNC-210A provides a choice of electric side mounting, as TRNC-125H.(L type)

TANSHING ACCURATE INDUSTRIAL CO., LTD.

  • Taiwan
  • No 1-1, Lane 165, Sec, 1, Tan-shing Rd., Taichung City 42743, Taiwan
  • 886-4-25384978
  • 886-4-25384980
  • 658051768