Feature

    BM-420T
  • Powerful 5 HP Inverter variable speed drive with Hi/Low gear 2 speed ranges
  • X-Y-Z Travel: 1000 x 500 x 550 mm
  • Hardened and ground spindle with NT40 taper
  • Hardened and chromed quill with 5" travel
  • P4 ABEC7 angular contact spindle bearings
  • C5 double nut X/Y/Z axes 32mm diameter ballscrew
  • Hardened and ground table surface
  • Ground T-slots to provide accurate reference edge
  • Hardened and ground, square X/Y ways
  • Turcite B coating on saddle X/Y axes ways Standard Rubber way cover on three axes
  • X/Y axes handwheels
  • Coolant system with pump
  • Automatic lubrication
  • Base chip tray and rear splash guard
  • Halogen work light
  • Tools, toolbox
    BM-460T, BM-560T, BM-600T
  • 7.5 Hp Hi torque Inverter variable speed drive with Hi-low speed ranges
  • Hardened and chromed quill with 5.51" travel with NT 40 taper
  • The spindle speed is programmable through the CNC control with over-ride capability
  • CP4 ABEC7 angular contact spindle bearings
  • C5 double nut X/Y/Z axes Ø40 mm diameter ballscrew.
  • Hardened/ground Box way construction
  • Turcite B coating on saddle X/Y/Z ways
  • Telescopic steel way cover on X/Y/Z
  • Coolant system with pump
  • Automatic lubrication with alarm
  • Heavy-duty chip tray, rear splash guard and table guarding
  • Long arm halogen work light 10V/70W
  • FAGOR 8055i FL MC Control System is perhaps the most versatile CNC in existence due to its Dual Operating System, it is a very powerful ISO G-code control System and in the other mode Icon conversational programming with highly interactive graphics
  • Base chip tray and rear splash guard
  • Icon Conversational Programming Rectangular Boss cycle, Round Boss cycle, Rectangular Pocket cycle, Circular Pocket cycles, Profile Pocket 2D & 3D cycles, Slot Milling, Profile Milling, Multiple Drilling cycles, Boring cycles, Reaming cycles, Arc bolt hole cycles, Random position cycles

Specification

BM-420T / BM-460T / BM-560T / BM-600T
 

BM-420T

BM-460TH

BM-560T

BM-600T

HEADSTOCK
Spindle Motor 5 HP 7.5 hp 7.5 hp 7.5 hp
Spindle speed range 60 - V 4200 rpm 60 - V 4500 rpm
Spindle Taper NT40 NT40 NT40
Quill diameter Ø100mm Ø105mm Ø110 mm Ø110 mm
Quill Travel 127mm (5") 150 mm (6") 150 mm (6") 150 mm (6")
Head swivel (Right/ Left) ±90 degrees ±90 degrees
TRAVEL
Table size (mm) 305 x 1520 400 x 1370 420 x 1600 (17"x63") 450 x1800 (18"x70")
Longitudinal travel (X-axis) 1000 mm (39.5") 1000 mm (40") 1300 mm (51") 1500 mm (60")
Cross travel (Y-axis) 500 mm (20") 510 mm (20") 630 mm (25") 630 mm (25")
Vertical travel (Z-axis) 550 mm (22") 560 mm (22") 610 mm (24") 610 mm (24")
Spindle nose to table top 100-660mm 100-660mm 120-750mm (5"-30") 120-750mm (5"-30")
Spindle center to column 550 mm 550 mm 660 mm 660 mm
Max. Table loading cap. 350 KGS 850 KGS 1200 KGS 1200 KGS
FEED
Feed Motor (X-Y-Z) 1 kW, AC 2 kW, AC 2 kW, AC
Rapid traverse (X-Y-Z) 8,000 mm/min 15,000 mm/min (393.70 ipm)
Cutting feed rate 5,000 mm/min (196 ipm)
Coolant pump motor 1/8 hp
Coolant Capacity 16 Gallons
Lubrication pump 150 W
Power required 15 KVA
Air required 6 kg/cm (85 psi)
Packing size (W x D x H) 65" x 78" x 82" 65" x 78" x 82" 72" x 84" x 88" 80" x 84" x 88"
Operation dimensions 110" x 75" x 93" 115" x 78" x 96" 165" x 84" x 105" 175" x 84" x 88"
Machine weight (Approx.) 2,300 kg 3,200 kg 3,800 kg 4,000 kg

All data subject to change without notice