Content :

Belt cold splicing glue
Before we choose glue, let us has a brief understanding on belt cold splicing joint.

Belt cold splicing joint, which means we sealed the joint with cold splicing methods, however, this method is no need to heat with vulcanizer. After we brush the glue, we can directly bond it. This process is entirely depend glue itself to finish the bonding performance for belt and joint. Thus we have high requirement on glue.

So which trait the glue has to have? We have to choose according to specific construction environment and operation demand.

If we need to use the belt urgently and we do rush repairs, this requires the glue is fast curing ,fast bonding and save time.

If it is in the place that has great temperature differences, which requires the glue has good adaption ability. The glue will not change the bonding strength and belt not change the toughness when the temperature changes.

If work under shaft, that is a closed area, the glue is insulate and non-flammable, which can extinguish itself when far from fire, avoid burning with little fire.

So, the glue has below characteristics.
1.Fast solidifying, high bonding efficiency. Easy operation and when do rush repairs, we can use it immediately, make the halt loss to minimum.
2.High bonding strength. Reliable bonding ability, after bonding, no worry about degumming and tackless.
3.strong stability, suitable to all environment.
4.Fire prevention and non-flammable.

Whether there is a kind of glue has above feature?
The answer is definitive.
Ramimtech belt bonding glue sk313,which contains 1kg glue and 40g hardener, solidifying speed is several times than usual glue, can suitable to temperature minus 40 degree to 120 degree, even can use under extreme surroundings, also non-flammable, which can ensure the construction safety.