Content :
Product Overview
Fault analysis and troubleshooting: 1. Inverter not working(1) Check that the plug is in place and loose. (2) Inverter switch turned on. (3) There is no voltage output for the car cigarette lighter Jack(such as the external lead wire, whether the polarity is correct, the red connection "+", the black connection "-'', whether the battery is electric). 2. Inverter output power is insufficient, can only drive small power appliances. (1) The battery capacity is too small(need to replace or reduce the use of electrical appliances). (2) Low battery voltage(to be charged or replaced). (3) If replaced with other vehicles, the inverter is normal. At this time, it is necessary to go to the professional repair shop to insert a thick cigarette lighter into the lead(using a cigarette lighter Jack not to load more than 200W). (4) If it is an external battery(a thick lead must be added to reduce the length of the lead).
Specifications
BEU1000LX
Rate Power
1000W
Surge Power
2000W
InputVoltage
12VDC or 24VDC or 48VDC
OutputVoltage
110VAC or 120VAC or 220VAC 5%
Frequency
50Hz/60Hz 3Hz
Waveform
Modified Sine Wave
Efficiency
92%
Overload Protection
1000W
Shortcircuit Protection
Yes
Temperature Protection
65 5
THD
<3%
Other Parameters
.inverter-belttt.com