Content :

Used as normal temperature or hot melt drop on glass beads for the construction of road marking,and play a role in reflecting light in time.


Used as hot melt Intermix Glass Beads for road marking which are mixed as premixed materials of the coating , it can ensure the long period reflecting light which the service life life of the road marking.


As the size particles of the kind of Traffic Paint Reflective Glass Micro Beads are much fine ,they are suitable for the surface spreading during the construction of normal temperature solvent type road marking coatings.














The production process of pavement marking glass microshpere is divided into six steps:



The production of Reflective Road Marking Spherical Glass Beads should choose raw materials, raw materials determine the quality of the Micro Glass Spheres reflective glass Beads, raw materials should choose clean glass with good strength and toughness.


Then make the glass crush into glass sand, according to the size of the granularity, crushed into a uniform moderate glass sand, in order to save manpower and material resources during burning.


The glass sand drying, then use the gas furnace for firing, the natural gas temperature adjusted to 800-1000 degrees, also check the roundness of the road marking glass beads.


For Reflective Micro Glass Beads semi-finished products, sieve with the shaker.


The screening of qualified glass beads, according to a certain proportion to mix, if you need to coating, need to be completed before stirring.


Road Marking Reflective Glass Beads Packing and shipment.






Intermix glass bead:


This type Intermix Glass Beads For Road Marking glass beads are premixed in marking materials on the ratio of 18-25 %( weight percentage) before application.


Drop on glass beads:


This type Traffic Pai .blyglassbeads.com