Content :

Corner radius end mills





PCD End mill selection

Select the end mill, first select the shape of the cutting edge according to the machining form, and then select the integral type according to the roughness of the working surface, the cost of the tool and the size of the machined part.
Welded and indexable. Then, the tool is selected for the integral, welded, and indexable type.
1. Select the cutting edge shape according to the processing form.

2. Select integral, welded and indexable according to the roughness of the machined surface, the cost of the tool and the size of the machined part.






PCD End milling processing features
The end mill is a milling tool with a slender shank with cutting edges on both the outer and outer faces. It can be used in a wide range of machining areas such as side machining, groove machining and curved surface machining.End milling has the following features.
The range of end mills that can be used is also very rich for the boring type.The tool is usually used under the condition of large overhang, the cutting is unstable, and the ZE, Yi Guangsheng rfi frequency is sincere, so the ZE cuts like a yak technique.In the past, the mainstream of end mills was high-speed steel integral end mills, and now with advances in coating technology and tool material technology,Coated hard alloy integral end mills and indexable end mills are becoming more and more popular, and are widely used in the processing of mold processing, high hardness materials, and difficult materials.




















F.D


Shnk  Dia.


O.A.L


Flute Length


Flute






inclination














Corner radius


Neck Length


.optdiamondtools.com