Content :

Product Information :






     This is an E27 dimming head with both RF remote control and WIFI control. The main function is to connect the Wi-Fi device to control the switch, brightness and time switch of the Wi-Fi device via RF transmitter or mobile APP.







Continuous power-on-off 3 times or more (each power-on time should not exceed 3 seconds): enter the EZ distribution network state, the output light flashes with low brightness, at this time, the distribution network can be configured according to the EZ configuration method;


Continuous power-on again when flashing - Power off 3 times or more (no more than 3 seconds per power-on time): Enter the AP distribution network state, and the output light flashes slowly with low brightness. At this time, the AP can be configured according to the AP configuration method.


The RF selects any set of ON/OFF within 3 minutes after flashing, by pressing ON first and then pressing OFF.


Note: After flashing for more than 6 seconds, the power will be turned off and will not flash when the power is turned on next time. The flashing will also stop after 3 minutes of continuous flashing.







Features:











Product model


SD2-WR




Product color


white




Product weight


400g




Product size



6*6*8mm





Input voltage


125Vac,60Hz




Output current


2A Max 250W resistive




Standby power consumption


0.4W




Smartphone system requirements


IOS 8.0 and above/Android 4.4 and above


















.cn-envirotech.com