Content :
Description of the Niel dust collector-High efficiency cyclone powder dust collector
1. How cyclone powder dust collector works
The wind motor drives the machine to run. During the process of dust collecting, the dust will be adsorbed on the filter element, and the vibration device will shake the adsorbed dust down to the dust collection drawer at the bottom, thereby circulating.
2. About connector
We can provide connector for 2 flexible pipe of diameter150mm per item
3. Is remote control possible?
Among the buttons of the control box, there are remote control and local control buttons. You only need to rotate the buttons to switch. If you switch to the remote control button, the machine will send out an electrical signal. The main control machine will receive the signal and control it. Prepare an English manual, don't worry
4. How to remove the dust from the system
Users can open the case, remove the dust collection drawer, and clean up the dust
This machine does not have a sensor to see issue with filtration, the quality of this machine is very good, as long as the dust is cleaned regularly, this is the core.
If the amount of dust in the workshop is not large, you can clean the dust collection drawer and filter element once every 10 days. If the amount of dust is large, you can clean the dust collection drawer and element once every 7 days.
5. About electric drawing
Electric drawing and 3D drawing need be provided after advance payment received, for company confidential matter.