Content :

The structure of the Niel single shaft paddle mixer machine is firm and stable. Both the mixing paddle and material contact of the single paddle mixer is made of stainless steel. Single shaft paddle mixer machine has good corrosion resistance and keeps the quality and cleanness of the material without discoloration. The transmission mechanism of a single paddle mixer adopts worm gear and worm to directly drive. It has no excessive noise when used, and has sufficient oil storage capacity to get good lubrication.

Niel Machinery has paddle mixers for sale. We supply high quality but cheap paddle mixer. The following are detailed information of rigid single paddle mixer.

Instructions for Use And Precautions of petrol paddle mixer Machine
Before using the paddle type mixer, perform a dry run test. Before the test, check the firmness of all the connecting parts of the paddle agitator mixer, the amount of lubricating oil in the reducer and the integrity of the electrical equipment, then close the main switch and put on the power supply.

Empty running test. The empty running test shall be connected to the test according to the steps and functions of Article 15 of this manual.

If you need to scrape the groove wall material during the operation of an electric paddle mixer, apply bamboo and wood tools, and do not use your hands to avoid accidents.

If the machine is found to be abnormal in vibration or abnormal noise during use, stop it immediately.

the use of load should not be too large, generally measured by the load of the motor, with 380V motor in the heavy-duty current when mixing, no more than 6 amps are normal if the load should be reduced immediately to reduce the mixing capacity.

The shaft seals at both ends of the mixing paddle should be kept clean to avoid blackening and deterioration of the material.