AAK INDUSTRY CO., LTD

Mr. VINSON ZHANG (China)

Trade Leads

AAK Hydraulic Pressure Valve Has No Horn Hole, Adair admired

  • Posted Date : 2024-03-28
  • Expiry Date: 2024-04-04

Content :

AAK hydraulic pressure valve has no horn hole. In Ningbo, the hydraulic valve production base, few factories are sure to solve the horn hole. AAK uses automatic programming software to program and upgrade the processing technology of hydraulic valve cavity hole. The geometric tolerance of each hole is within 0.02mm. At the same time, small fillet is used to replace the R angle of our peers to transition, which completely avoids the horn hole.

Most hydraulic valve manufacturers use manual programming to design the geometric tolerance of cavity hole, which is prone to human error and can not be corrected.

Adair, a hydraulic valve purchaser in Scotland, had many contacts with AAK hydraulic valve before, because he pursues low price, there is no cooperation between us. In July this year, he placed an order for hydraulic pressure valve worth 80,000 US dollars to a hydraulic valve manufacturer in Ningbo.

When we received Adair's email, we understood the problems and causes of his hydraulic pressure valve. After we took the video and sent it to him.

AAK hydraulic valve is good at finding the pain points of traditional process, and is more willing to take time to improve or innovate the production process of hydraulic valve. Many times, the process has been one step ahead of the peers. For example, this hydraulic pressure valve is programmed by automatic programming software, which replaces the manual programming commonly used by our peers. After the hydraulic pressure valve automatically generates the cavity hole, then next step is processed. The geometric tolerance of each hole must be controlled within 0.02mm. If it does not meet the standard, the next step of processing will not be carried out. At the same time, each transition angle between the small holes of the hydraulic pressure valve uses a small fillet to replace the common R angle of our peers.

Other Trade Leads

Mar. 28, 2024
Maarten purchased a batch of hydraulic valve blocks some time ago. In the early test, the system parameters were normal. Strangely, 10 days after the ....
Mar. 28, 2024
Hydraulic directional control valve troubleshooting, in only half of the time given by Leo, AAK HYDRAULIC VALVE used Fluororubber Sealing Ring and solved ....
Mar. 28, 2024
After the previous article talking about the manufacturing process of hydraulic valve block, we received many customers' message on our website. The new ....
Mar. 28, 2024
The types of hydraulic cartridge valves can be classified from different angles. In order to classify more simply and intuitively, AAK HYDRAULIC VALVE ....
Mar. 28, 2024
The hydraulic needle valves produced by AAK has no leakage and its stability exceeds that of most of its hydraulic valve peers, enabling a foreign trade ....
Mar. 28, 2024
The reverse sealing performance of hydraulic check valve has always been the hard index controlled by AAK. AAK has its own technology and process. It ....
Mar. 28, 2024
Kaden, a hydraulic valve purchaser from the United States, has been successfully purchasing hydraulic valves from China in recent years, and his boss also ....
Mar. 28, 2024
In the intersecting processing channels of the hydraulic valve block, iron filings are easy to remain, especially in the slender hole, which is difficult ....
Mar. 28, 2024
The purchase of hydraulic valves of Chase has been very smooth for 2 years, but a recent order for hydraulic valve blocks made him very difficult. In the ....
Mar. 28, 2024
AAK pilot hydraulic pressure valve adds welded high-strength filter screen at the inlet section of slender hole, and the damping hole is 100% unblocked. ....
Mar. 28, 2024
AAK adopts the high-pressure solution injection method, weakens the magnetism of the burr with the solution, and then uses the instantaneous impact force ....
Mar. 28, 2024
When Brody learned that we AAK hydraulic valve could meet the process requirements of his hydraulic valve block and was willing to make a sample for him to ....