Content :

This model 100 automatic cutter for heat shrink tubing is a fully automatic shrink tube cut to length machine driven by stepper motor, designed for cutting heat shrink tube,soft tube,sleeve, ribbon cable,foil, paper and other thin and soft materials, set cutting length and quantity, auto feeding, working and stop.

Feature:
1. High speed: It can cut 100-120 cut per minute. (50mm long)
2. Accuracy: Cut-length is accurate. Material is sent by a stepping motor.
3. Cutting type: Cutting is neat due to using a cold cutter which is durable.
4. Automatic operation: It works automatically only by setting length and quantity.
5. Automatic stopper: It stops automatically if materials run out during operation.
6. Blade type: Cold or Hot cut. Hot blade cut for nylon/polyester/braided webbing, avoid fraying.
7. Memory: Set-length, set-qty set-speed are not erased even if power off on.
8. Application: Sleeve, rubber/plastic tube, small wire, sheet, film, etc.
9. High speed, high accuracy, designed for cutting non-adhesive materials.
Description:
Model: 100 (can be custom for customer)
Voltage: 220v/110v 60HZ/50HZ
Power: 250 W
Cutting length: 0.1-10000mm
Blade width: 100mm
Weight: 28 KG
Dimension: L420xW350xH390mm
Cut speed: 120cut/minute (50mm)