Knee type deep hole drilling machine:
1. Knee type Gun drilling machine with Fanuc CNC controller (Mitsubishi control are available).
2. This type machines are suitable for the production of waterlines, heat and ejector pinholes of injection molds, hydraulic manifold and heat exchangers that require multi hole drilling.
3. Servomotor and ball screw are used for the feed mechanism to insure smooth and convenient for feed rate adjust.
4. Automatic lubrication pump is provided as standard accessory to ensure all the bearing surface and screws are well lubricated.
5. Main slide equipped with P-grade precision linear guide and C3 grade ball srew.
6. Easy positioning of X.Y. axes and setting of stroke and feed.
7. The machine could be designed to 2 spindles for special purpose.
8. CE mark is available for special required.
1. Hole dia: Ø3~Ø12 mm / Ø12~Ø25 mm (option).
2. Max. depth (Z): 1000 mm.
3. Spindle motor Fanuc 3/10000i 6/10000i.
4. Worktable horizontal (X): Fanuc 12/3000i.
5. Drill spindle vertical (Y): Fanuc 12/3000i with brake device.
6. Drill spindle feed (Z): Fanuc 8/3000i.
7. High pressure pump motor: 5~7.5 HP.
8. Max. spindle speed: 6000 rpm.
9. Drill speed: 10~ 150 mm / min.
10. Rapid 5000: mm / min.
11. Spindle infeed(Z): Ø40 x P10 x C3.
12. Max. loading capacity: 1,000 kg.
13. Table size: 600 x 1000 mm.
14. Stroke of worktable vertical (Y): 380 mm.
15. Pump output: 40 Liter / min.
16. Max. pressure: 100 kg / cm.
17. Coolant tank: 800~1200 Liter.
18. Controller type: Fanuc 0iMC Absolute System
19. Controlled axes: X, Y, Z & spindle.
20. Floor space: 3000 x 4000 mm.
21. Net weight: 5500 kg.