Polystyrene Manufacturers

Ming Dih Industry Co., Ltd. : Polystyrene

Profile: Ming Dih Industry Co.,Ltd. was established in 1986. The objective of our Expandable Polystyrene raw material is to be produced and used with advanced technological products, industrial products, and packaging for general consumer products. Also the Polystyrene materials are used in building construction as well. Therefore there's an extensive variety of usage available for this particular material. Our company is consistently developing new formulas to improve the quality and creating new materials in order to be more of a competitive company in the market of the same material. Not only that we have met international standards with this material, we have continued to become an international company providing EPS worldwide.

• Also see products: Polystyrene Manufacturer or its product categories

* Company Link * Company Profile * Product Map * All Products * Hot Products

1. National Applied Material Co., Ltd. : Polystyrene Manufacturers

Profile: National Applied Material Co.,LTD was one of a Polystyrene Provider and founded in 2002. We has 20 year experiences at this area. Our extra service for our customers are analyzing complex material of custom' products and advising or developing similar material. We have factories from north to south, on-time delivery that you can rely on, and excellent products of stable quality. We also provide services of manufacturing and supplying custom packaging materials for OEM & ODM. Also, our main objective is to provide our customers with the best quality products, great services and trying to maintain satisfactory and long term business relationship for as long as possible. Your inquiries or order proposals will be highly appreciated.

* Company Link * Company Profile * View All Items

2. Guangzhou Shingharng Plastic Manufactures Co., Ltd. : Polystyrene Manufacturer

Profile: Guangzhou SHING-HARNG Plastic Manufactures Co., Ltd., a solely foreign-funded company, was established in 1993 and is now a nationwide well-known enterprise in the plastic and rubber industry. Our products including Polystyrene, thermal insulation materials, anion mattresses, Ozone water purifiers. On the base of it, she has been researching and developing the new environmental-friendly and energy-saving products, Pipe support and New Negative ion mattress. The company always keeps moving forward to run enterprise as the principle of sustainable development. We will sincerely and warmly welcome both inside and outside customers to visit and deal business with us.

* Company Link * Company Profile * View All Items

3. ADA Mould Technology Co., Ltd. : Polystyrene Manufacturers

Profile: ADA has accumulated about 15 years of experience in Polystyrene making and injection process including plastic injection moulders, plastic injection moulder, moulder. Through our extensive network of manufacturing and assembly facilities, ADA has a global reach with a breadth of product offerings that is perfect in the mould and plastic industry. We make our experience available to you in a variety of ways. Whether it is offering our own custom product research and development services or providing our versatile product line to you, we have everything you need to make your products the very best it can be. We invite you to test us out and see why we are the best, by ordering some moulds and products.

* Company Link * Company Profile * View All Items

1. Top Vision International Corporation : Polystyrene Manufacturers

( Origin : Taiwan Manufacturer & Supplier )
plastic material broker, plastics for valves & engineering- PC, PC/ ABS, PC/ PBT, POM, polycarbonate, PS, Polystyrene, PP, polypropylene, MS, ABS, POM, PBT, acrylonitrile, butadiene- styrene, AS, SAN, styrene-acrylonitrile, PMMA, rubbers, polymethyl methacrylate, polyacetal, K plastic, automobile components.

* Company Link

2. Telung Polylon Ind. Co., Ltd. : Polystyrene Manufacturer

( Origin : Taiwan & Mainland China Manufacturers & Suppliers )
packaging & packing products- PVC ( PS, PE, PP, PET-G, A-PET) trays, hard PVC ( polyvinyl chloride ), PET, BLOOK, EPS ( Polystyrene ) polyfoams, EPP( polypropylene ), EPE ( suitable for electronic, computer, sporting equipment, hardware industry ) foam rolls, EVA foot cushions, PU foams ( color, fireproof, rubber, anti-static foams ), EPO.

* Company Link

3. Garland Plastics Co., Ltd. : Polystyrene Manufacturers

( Origin : Taiwan Manufacturer & Supplier )
industrial supplies- acrylic sheets, PMMA, PMMA sheets, extruded acrylic sheets, extrusion plastic sheets, PS sheet, Polystyrene sheet, GPPS sheet, patterned sheets.

* Company Link

4. Tocon Electronic Co., Ltd. : Polystyrene Manufacturer

( Origin : Taiwan Manufacturers & Suppliers )
Tocon Electronic Co., Ltd. was built in 1983 specializing in Polystyrene. In the beginning, Tocon Electronic made OEM orders for Japanese customers. In the 1992, Tocon Electronic used auto production equipment to enhance work process. Hence the products we make are more reliable, longer loading life, and less tolerance. By 1997, ISO 9002 was inducted because our construction got larger and larger. In 2000, we decided to add two kinds of electrical capacitors into our facilities, including film and ceramic capacitors. In the meantime, part of manufactures was moved to China for higher quality and low production cost. We further cooperate with Japanese capacitors to develop high rank production process. Look forward to your coming. We hope that we can set up a good business relationship...

* Company Link

5. Quang Yeu Enterprise Co., Ltd. : Polystyrene Manufacturers

( Origin : Taiwan Manufacturer & Supplier )
Quang Yeu Enterprise Co., Ltd., is located in 1994, specialized in provide one kind of material Polystyrene. What we are aiming for is to produce best products and get customers' 100% trust and satisfaction. "All employees involved, high quality, customers' satisfaction" are our quality policy to be carried out. We are looking forward to cooperating with all interested customers in home and abroad. Please visit our homepage for more detail products information. If you are interest our products, contact us, we will offer you the best price and superior high quality. We wish to have a long term business relationship with you in the near future.

* Company Link

6. Perria Co., Ltd. : Polystyrene Manufacturer

( Origin : Taiwan Manufacturers & Suppliers )
industrial packaging design, production of packaging material- pulp moulding, corrugated-paper, Polystyrene, vacuum forming, blister, modeling template, partition template.

* Company Link

7. Jiu Yi / Sengar Machinery Works Co., Ltd. : Polystyrene Manufacturers

( Origin : Taiwan Manufacturer & Supplier )
plastic extruder machinery- PE ( PP ) single, tandem, sandwich extrusion laminating machines, PET ( PE ) co-extrusion laminating machine, expanded Polystyrene board foam sheet making machine, expanded Polystyrene foam sheet making machine, PP ( HDPE ) flat yarn making machine, embossed PP ( PS, HIPS, GPS ) sheet making machine, PET sheet making machines, EPE ( Expanded PE ) foam cloth making machine.

* Company Link

1. Expandable Polystyrene (EPS)

1. Preforming: The steam must be saturated at the temperature of 95°~105°C. To reach the density we demand with a continuous or batch type performer, sometimes pre-foaming twice is recommended, when we want the density below 20 kg/m³. 2. Conditioning: Generally, 6-24 hours is recommended, depends on the density. Between the two steps performing, the conditioning time for 4~8 hours is suggested. 3. Moulding: The machine should be fed with saturated steam with the maximal pressure of 1.3~1.5 bar (about 105~110°C). The steaming time depends on the equipment used as well as the required size and strength of the final product. Therefore, all the machines must be adjusted individually. In order to reduce the cycling time and to increase the strength of the product, the vacuuming of the equipment...

2. Expandable Polystyrene (EPS)

1. Preforming: The steam must be saturated at the temperature of 95°~105°C. To reach the density we demand with a continuous or batch type performer, sometimes pre-foaming twice is recommended, when we want the density below 12 kg/m³. 2. Conditioning: Generally, 6-24 hours is recommended, depends on the density. Between the two steps performing, the conditioning time for 4~8 hours is suggested. 3. Moulding: The machine should be fed with saturated steam with the maximal pressure of 1.3~1.5 bar (about 105~110°C). The steaming time depends on the equipment used as well as the required size and strength of the final product. Therefore, all the machines must be adjusted individually. In order to reduce the cycling time and to increase the strength of the product, the vacuuming of the equipment...

3. Expandable Polystyrene (EPS)

1. Preforming: The steam must be saturated at the temperature of 95°~105°C. To reach the density we demand with a continuous or batch type performer, sometimes pre-foaming twice is recommended, when we want the density below 20 kg/m³. 2. Conditioning: Generally, 6-24 hours is recommended, depends on the density. Between the two steps performing, the conditioning time for 4~8 hours is suggested. 3. Moulding: The machine should be fed with saturated steam with the maximal pressure of 1.3~1.5 bar (about 105~110°C). The steaming time depends on the equipment used as well as the required size and strength of the final product. Therefore, all the machines must be adjusted individually. In order to reduce the cycling time and to increase the strength of the product, the vacuuming of the equipment...

4. Expandable Polystyrene (EPS)

1. Preforming: The steam must be saturated at the temperature of 95°~105°C. To reach the density we demand with a continuous or batch type performer, sometimes pre-foaming twice is recommended, when we want the density below 12 kg/m³. 2. Conditioning: Generally, 6-48 hours is recommended, depends on the density. Between the two steps performing, the conditioning time for 4~8 hours is suggested. 3. Moulding: The machine should be fed with saturated steam with the maximal pressure of 1.3~1.5 bar (about 105~110°C). The steaming time depends on the equipment used as well as the required size and strength of the final product. Therefore, all the machines must be adjusted individually. In order to reduce the cycling time and to increase the strength of the product, the vacuuming of the equipment...

5. Expandable Polystyrene (EPS)

Self-extinguishing (Flame-retardant) UL94: 1. Preforming: The steam must be saturated at the temperature of 95°~105°C. To reach the density we demand with a continuous or batch type performer, sometimes pre-foaming twice is recommended, when we want the density below 12 kg/m³. 2. Conditioning: Generally, 6-48 hours is recommended, depends on the density. Between the two steps performing, the conditioning time for 4~8 hours is suggested. 3. Moulding: The machine should be fed with saturated steam with the maximal pressure of 1.3~1.5 bar (about 105~110°C). The steaming time depends on the equipment used as well as the required size and strength of the final product. Therefore, all the machines must be adjusted individually. In order to reduce the cycling time and to increase the strength...

6. Expandable Polystyrene (EPS)

1. Preforming: The steam must be saturated at the temperature of 95°~105°C. To reach the density we demand with a continuous or batch type performer, sometimes pre-foaming twice is recommended, when we want the density below 12 kg/m³. 2. Conditioning: Generally, 6-24 hours is recommended, depends on the density. Between the two steps performing, the conditioning time for 4~8 hours is suggested. 3. Moulding: The machine should be fed with saturated steam with the maximal pressure of 1.3~1.5 bar (about 105~110°C). The steaming time depends on the equipment used as well as the required size and strength of the final product. Therefore, all the machines must be adjusted individually. In order to reduce the cycling time and to increase the strength of the product, the vacuuming of the equipment...

7. Expandable Polystyrene (EPS)

1. Preforming: The steam must be saturated at the temperature of 95°~105°C. To reach the density we demand with a continuous or batch type performer, sometimes pre-foaming twice is recommended, when we want the density below 12 kg/m³. 2. Conditioning: Generally, 6-24 hours is recommended, depends on the density. Between the two steps performing, the conditioning time for 4~8 hours is suggested. 3. Moulding: The machine should be fed with saturated steam with the maximal pressure of 1.3~1.5 bar (about 105~110°C). The steaming time depends on the equipment used as well as the required size and strength of the final product. Therefore, all the machines must be adjusted individually. In order to reduce the cycling time and to increase the strength of the product, the vacuuming of the equipment...

8. Expandable Polystyrene (EPS)

1. Preforming: The steam must be saturated at the temperature of 95°~105°C. To reach the density we demand with a continuous or batch type performer, sometimes pre-foaming twice is recommended, when we want the density below 12 kg/m³. 2. Conditioning: Generally, 6-48 hours is recommended, depends on the density. Between the two steps performing, the conditioning time for 4~8 hours is suggested. 3. Moulding: The machine should be fed with saturated steam with the maximal pressure of 1.3~1.5 bar (about 105~110°C). The steaming time depends on the equipment used as well as the required size and strength of the final product. Therefore, all the machines must be adjusted individually. In order to reduce the cycling time and to increase the strength of the product, the vacuuming of the equipment...

9. Expandable Polystyrene (EPS)

1. Preforming: The steam must be saturated at the temperature of 95°~105°C. To reach the density we demand with a continuous or batch type performer, sometimes pre-foaming twice is recommended, when we want the density below 12 kg/m³. 2. Conditioning: Generally, 6-24 hours is recommended, depends on the density. Between the two steps performing, the conditioning time for 4~8 hours is suggested. 3. Moulding: The machine should be fed with saturated steam with the maximal pressure of 1.3~1.5 bar (about 105~110°C). The steaming time depends on the equipment used as well as the required size and strength of the final product. Therefore, all the machines must be adjusted individually. In order to reduce the cycling time and to increase the strength of the product, the vacuuming of the equipment...

10. Expandable Polystyrene (EPS)

1. Preforming: The steam must be saturated at the temperature of 95°~105°C. To reach the density we demand with a continuous or batch type performer, sometimes pre-foaming twice is recommended, when we want the density below 20 kg/m³. 2. Conditioning: Generally, 6-24 hours is recommended, depends on the density. Between the two steps performing, the conditioning time for 4~8 hours is suggested. 3. Moulding: The machine should be fed with saturated steam with the maximal pressure of 1.3~1.5 bar (about 105~110°C). The steaming time depends on the equipment used as well as the required size and strength of the final product. Therefore, all the machines must be adjusted individually. In order to reduce the cycling time and to increase the strength of the product, the vacuuming of the equipment...