Shun Chuan Precision Machinery Co., Ltd.

Tel:886-37-741591       Fax:886-37-741593
Address:No. 5, Lin 1, Shan Kan Li, Yuan Li Town, Miaoli 35873, Taiwan


New CNC Lathes (Turning Centers)

turning centers

  • Model No: CNE-20
  • Factory Location: Taiwan
  • Sample Request: No
  • Target Markets: Worldwide

Detail Information

Description :

1. Optimum structural design a new definition for rigidity and stability:
With years of efforts of research and development, the Shun Chuan's slant bed CNC lathe will offer the unique rigidity. The design concept behind the CNE-20/CNE-26 series is to enhance heavy duty, precision and stability. With its excellent machine structure, you can handle heavy cutting with more ease than ever before.
2. Complete oil fluid separation:
(1) In addition to the oil fluid separation design on X- and Z-axes, the cutting fluid tank is specially designed with a labyrinth construction to fully exhaust the floating oil.
(2) This assures no oil in the cutting fluid. Double filters in the fluid tank to ensure a clean recirculated fluid.
3. Programmable tailstock:
(1) The ruggedly constructed, programmable tailstock and quill movement can be controlled on the control panel for easy set-up and accurate positioning.
(2) Tailstock movement is driven by turret slide.
4. Tool pre-setter:
(1) The tool pre-setter effectively reduces cutting tests while saving machining time.
(2) The mechanism is used for measuring the tool diameter and length.
(3) The tool adjustment arm is powered and program controlled.
5. Powerful spindle drive:
The spindle is driven by a powerful motor, providing great horsepower output for heavy duty machining.

Specification :

1. Standard accessories:
(1) CNC controller: FANUC 0i–TC.
(2) Boring bar holder: 2 sets.
(3) O.D./facing tool holder: 2 sets.
(4) U drill holder: 1set.
(5) Boring socket : For H10 * Ø12/Ø16/Ø20/Ø25/Ø32: 1 piece for each. * Drilling socket MT.3 x Ø40: 1 piece.
(6) Boring socket : For H12 * Ø12/Ø16/Ø20/Ø25: 1piece for each. * Drilling socket MT.2 xØ32: 1 piece. (7) Chip conveyor and chip bucket cart.
(8) Pedal switch for chuck open and close.
(9) Hydraulic hollow chuck with rotary cylinder.
(10) Programmable tailstock with hydraulic clamp system.
(11) Hydraulic system with tank for power chuck, turret and tailstock quill.
(12) Work light.
(13) Coolant system.
(14) Heat exchanger.
(15) Rotating center MT.4: 1set.
(16) Machining finishing lamp.
(17) Auto lubrication system.
(18) Level pads: 6pcs.
(19) Toolset and box.
(20) Operation manual.
(21) Maintenance manual.
2. Optional accessories:
(1) Auto door.
(2) Transformer.
(3) Collet chuck.
(4) Parts catcher.
(5) Auto tool pre-setter.
(6) CE configuration.
(7) Auto bar feeder w/interface.
(8) Air blow system.
(9) VDI 30 x 12 tools / □20mm electronic type turret.
(10) Cs axis control and function with break system/VDI 30 revolving tool turret.
3. Specification:

CapacityNo. of control axis2 Axis
Swing over bedØ630mm (24.8")
Standard turning diameterH10....Ø230mm (9.05") / H12....Ø300mm (11.81")
Maximum turning diameterH10....Ø300mm (11.81") / H12....Ø340mm (13.38")
Work length600mm (23.62")580mm (22.83")
and Main Spindle
Spindle nose, internal taperA2-6, Ø69 Taper 1/20A2-6, Ø81 Taper 1/20
Spindle boreØ65mm (2.56")Ø78mm (3.07")
Bar capacityØ52mm (2.04")Ø65mm (2.56")
Hydraulic power chuckØ210mm (8")Ø254mm (10")
Range of spindle speed45-4500 R.P.M.35-3500 R.P.M.
Front bearing ID. of spindleØ100mm (3.937")Ø120mm (4.724")
Cross Slide (X-axis)
and Carriage (Z-axis)
Cross slide travel (X-axis)H10....Ø190mm (7.48") / H12....Ø207mm (8.15")
Longitudinal travel (Z-axis)610mm (24")590mm (23.23")
AC servo motor ( X-axis )1.6kW 8N.m ~ FANUC α8B/3000i
AC servo motor ( Z-axis )3.0kW 12N.m ~ FANUC α12B/3000i
Dia. of ball screw ( X-axis)Ø32mm (1.26") P5 C3
Dia. of ball screw ( Z-axis )Ø40mm (1.57") P10 C3
Rapid traverse speed ( X-axis )15m/min (590 ipm)
Rapid traverse speed ( Z-axis )20m/min (787 ipm)
Cutting feed rate (Both axis)0.001-500mm/rev.
TurretTool station (Random)H10....10 tools / H 12....12 tools
Size of external turning toolH10....□25mm / H12....□20mm
Boring bar diameterH10....Ø40mm(1.575") / H12....Ø32mm(1.26")
TailstockQuill diameterØ85mm (3.346")
Quill travel120mm (4.72")
Taper of centerMT. No.4
Tailstock travel550mm (21.65")
MotorMain spindle (continuous rated)STD. AC9kW (12HP) OPT. AC11kW (15HP)STD. AC11kW (15HP) OPT. AC15kW (20HP)
Main spindle (30 min. rated)STD. AC11kW (15HP) OPT. AC15kW (20HP)STD. AC15kW (20HP) OPT. AC18.5kW (25HP)
Hydraulic oil pump2.2 kW (3HP)
Coolant pump375W (0.5HP)
Tank CapacityHydraulic tank65 Litre (14.3 gal.)
Coolant tank180 Litre(39.6 gal.)
MeasurementsWeight ( Net / Gross ) Approx.5200kgs/5700kgs5500kgs/6000kgs
Packing sizesLength400mm (157.5")
Width x HeightWidth 1890mm(74.41") x Height 2230mm(87.8")


Shun Chuan Precision Machinery Co., Ltd.

  • Taiwan
  • No. 5, Lin 1, Shan Kan Li, Yuan Li Town, Miaoli 35873, Taiwan
  • 886-37-741591
  • 886-37-741593