Shun Chuan Precision Machinery Co., Ltd.

Tel:886-37-741591       Fax:886-37-741593
Address:No. 5, Lin 1, Shan Kan Li, Yuan Li Town, Miaoli 35873, Taiwan


High Speed Precision Lathes


  • Model No: BHL-1550
  • Factory Location: Taiwan
  • Sample Request: No
  • Target Markets: Worldwide

Detail Information

Description :

•All castings are properly stabilized and stress relieved.
•Bed ways are hardened & ground to min. HS-70.
•Turcite B coating between the bed and carriage.
•Extremely low noise level.
•Foot brake pedal provided.
•Built-in coolant pump & fitting provided.
•CSS (constant surface speed control) on request for E.V.S. model
•Wider bed way which give absorbs vibration.
•All models with mechanical clutch. (excluded E.V.S. model)
•All models with auto lubrication system to headstock & external tank for cooling the oil
•All models meet CE. (on request)
•All models with 56mm (2.2") spindle bore, ASA D1-6.

Specification :


  1. Backplate for 9" chuck
  2. Dead center MT.4
  3. Dead center MT.4 with carbide tip
  4. Spindle center sleeve MT.6
  5. Level pads......8 pcs
  6. Tool set & Box
  7. Operation manual & parts list


  1. 3-Jaws scroll 9" chuck
  2. 4-Jaws independent 10" chuck
  3. 5C collet closer attachment
  4. 5C collets (metric or inch)
  5. Driving plate with dog
  6. Chuck safety guard
  7. Hydraulic copying attachment
  8. Tool post grinder attachment
  9. Taper turning attachment
  10. Electrical system for CE
  11. Protect cover on leadscrew for CE
  12. Steady rest w/ball bearing
  13. Follow rest w/bronze tip
  14. Faceplate 12"
  15. Drill chuck & arbor
  16. Rotating center MT.4
  17. Halogen lamp
  18. Quick change tool post
  19. Carriage micro stop set
  20. Digital read out system
  21. Full length splash guard


CapacityHeight of centers190 mm (7.48")
Swing over bedØ380 mm (14.96")
Swing in gapØ610 mm (24")
Swing over cross slideØ238 mm (9.37")
Distance between centers1250 mm (50")
Width of bed280 mm (11")
Gap width in front of faceplate265mm (10.43")
Headstock and
Main Spindle
Spindle nose, internal taperD1-6, MT.No.6
Spindle center sleeveMT. No.6 x MT. No.4
Spindle boreØ56 mm (2.2")
Spindle speed:Gear steps
16 steps / 25~2000 R.P.M.
"MATRIX" Disc clutch for Forward / Reverse

4 steps /
L22~72 R.P.M.
M70~235 R.P.M.
MH235~780 R.P.M.
H753~2500 R.P.M.
CarriageLength on bed / Width of carriage484 mm (19.05") / 450 mm (17.71")
Cross slide travel235 mm (9.25")
Top slide travel120 mm (4.72")
Threads and FeedsWhitworth threads: Kinds / Range45 Kinds / 2~72 T.P.I.
Metric threads: Kinds / Range39 Kinds / 0.2~14 mm
D.P. threads: Kinds / Range21 Kinds / 8~44 D.P.
M.P. threads: Kinds / Range18 Kinds / 0.3~3.5 M.P.
Longitudinal feeds0.04~1.0 mm (0.0015"~0.04")
Cross feeds0.02~0.5 mm (0.00075"~0.02")
TailstockQuill diameterØ59 mm (2.322")
Quill travel127 mm (5")
Taper of centerMT.No.4
MotorMain spindle7.5HPAC 5.5kW (7.5HP), lnverter
Forced lubrication for HD.--1/4HP
Coolant pump1/8HP
MeasurementWeight (Net /Gross) Approx.1450 kgs / 1700 kgs
Packing sizesLength2580 mm (101.58")
Width x HeightWidth 1120 mm (44.1") x Height 1900 mm (74.8")

Specifications subject to change without notice.


Shun Chuan Precision Machinery Co., Ltd.

  • Taiwan
  • No. 5, Lin 1, Shan Kan Li, Yuan Li Town, Miaoli 35873, Taiwan
  • 886-37-741591
  • 886-37-741593