Shun Chuan Precision Machinery Co., Ltd.

Tel:886-37-741591       Fax:886-37-741593
Address:No. 5, Lin 1, Shan Kan Li, Yuan Li Town, Miaoli 35873, Taiwan

Products

High Speed Precision Lathes

High-Speed-Precision-Lathes-8

  • Model No: ERL-1330
  • Factory Location: Taiwan
  • Sample Request: No
  • Target Markets: Worldwide

Detail Information

Description :

•All models with oil bathed lubrication system to headstock.
•All models meet CE. (on request)
•All models with 40mm (1.57") spindle bore, ASA D1-4.
•All castings are properly stabilized and stress relieved.
•Bed ways are hardened & ground to min. HS-70.
•Extremely low noise level.
•Foot brake pedal provided.
•Built-in coolant pump & fitting provided.
•CSS (constant surface speed control) on request for E.V.S. model
•Wider bed way which give absorbs vibration.

Specification :

STANDARD ACCESSORIES:

  1. Backplate for 7" chuck
  2. Dead center MT.3
  3. Dead center MT.3 with carbide tip
  4. Spindle center sleeve MT.5
  5. Level pads......6 pcs
  6. Tool set & Box
  7. Operation manual & parts list

OPTIONAL ACCESSORIES:

  1. 3-Jaws scroll 7" chuck
  2. 4-Jaws independent 8" chuck
  3. 5C collet closer attachment
  4. 5C collets (metric or inch)
  5. Driving plate with dog
  6. Chuck safety guard
  7. Hydraulic copying attachment
  8. Tool post grinder attachment
  9. Taper turning attachment
  10. Electrical system for CE
  11. Protect cover on leadscrew for CE
  12. Steady rest w/ball bearing
  13. Follow rest w/bronze tip
  14. Faceplate 12"
  15. Drill chuck & arbor
  16. Rotating center MT.3
  17. Halogen lamp
  18. Quick change tool post
  19. Carriage micro stop set
  20. Digital read out system
  21. Full length splash guard

SPECIFICATIONS:

MODELERL-1330ERL-1340ERL-1330VERL-1340V
CapacityHeight of centers171 mm (6.73")
Swing over bedØ342 mm (13.46")
Swing in gapØ512 mm (20")Not available for ERL-1330
Swing over cross slideØ205 mm (8.07")
Distance between centers760 mm (30")1000 mm (40")760 mm (30")1000 mm (40")
Width of bed230 mm (9")
Gap width in front of faceplate150 mm (5")
Headstock and
Main Spindle
Spindle nose, internal taperD1-4, MT. No.5
Spindle center sleeveMT. No.5 x MT. No.3
Spindle boreØ40 mm (1.57")
Spindle speed:Gear steps
/
Range

8 steps

4P
OPT

/80~2000 R.P.M.
16 steps
2P / 4P
/
4P50~1305 R.P.M.
2P100~2570 R.P.M.

2 steps
4P
/
L100~500 R.P.M.
  
H500~3000 R.P.M.
Infinitely variable
CarriageLength on bed / Width of carriage400 mm (15.748") / 38 mm (15.118")
Cross slide travel180 mm (7")
Top slide travel100 mm (4")
Threads and FeedsWhitworth threads: Kinds / Range45 Kinds / 2~72 T.P.I.
Metric threads: Kinds / Range39 Kinds / 0.2~14 mm
D.P. threads: Kinds / Range21 Kinds / 8~44 D.P.
M.P. threads: Kinds / Range18 Kinds / 0.3~3.5 M.P.
Longitudinal feeds0.05~1.7 mm (0.002"~0.067")
Cross feeds0.025~0.85 mm (0.001"~0.034")
TailstockQuill diameterØ50 mm (1.968")
Quill travel112 mm (4.5")
Taper of centerMT.No.3
MotorMain spindle3HP 4P OPT.5 HP 2P/2.5HP 4PAC 2.2kW (3HP), Inverter
Coolant pump1/8HP
MeasurementWeight (Net /Gross) Approx.850 / 1000 kgs1000 / 1200 kgs850 / 1000 kgs1000 / 1200 kgs
Packing sizesLength2000 mm (78.8")2270 mm (89.4")2000 mm (78.8")2270 mm (89.4")
Width x HeightWidth 965 mm (38") x Height 1900 mm (74.8")

Specifications subject to change without notice.

Shun Chuan Precision Machinery Co., Ltd.

  • Taiwan
  • No. 5, Lin 1, Shan Kan Li, Yuan Li Town, Miaoli 35873, Taiwan
  • 886-37-741591
  • 886-37-741593