Vertical Bandsaw With Auto-Sliding Table

Model No: MODEL 450D
Factory Location: Taiwan
Sample Request: No
Target Markets: Worldwide

Detail Information

Description :

*Infinitely variable speed.
*The band tension is cushioned.
*Blade welder and grinder are front mounted for quick, accurate blade repair and installation.
*Interchangeable rubber bonded saw wheels.
*Brush for cleaning lower drive wheel.
*Manintenance-free airpump provides air to remove chips from the point of cut.
*The upper wheel could be adjusted for band tensioning.
*Hand wheel controlled speed.
*Adjustable saw blade guides.
*Machine light is fitted.
*Change speeds while the machine is in operation, without stopping, without pulley changes.
*Cast iron frame to minimize machine vibration.
*The machine is with a device for automatic linear cutting.
*Work table may take speedy reverse movement.
*Moton of work table is controlled by stepless speed controller.
*Work table is with auto stoppers.

Specification :

SPECIFICATION	mm (in.)
Height Under Guide	215mm 8-1/2"
Throat, Band to Column	450mm 18"
Blade Speed	25-117m/min 82-384ft/min
Blade Width	3-15mm 1/8"-5/8"
Blade Length	3570mm 140-1/2"
Size of Table	565×500mm 22-1/4"×19-5/8"
Tilt, Main Table	5° R, 5° L
Motor	1HP
N0. of "T" Slots in Table	None
Table Stroke	235mm 9-1/4"
Table Feed Operation	Electric Powered
Machine Size	1030×950×1870mm 40-1/2"×37-3/8"×73-5/8"
Net Weight	410kgs 902lbs
Ship Weight	490kgs 1078lbs
Packing Size	1130×700×2050mm 44-1/2"×27-1/2"×80-3/4"