1. Character:
-Microprocessor based design
-Green power function
-Remote control interface
-Heat-Sink built in internal
-Soft Start
-AVR design
-Input & Output isolated
-Auto temperature control fan
-Reverse polarity protection / by fuse / diodes /
-Output short circuit protection
-Temperature protection: 50 +/- 5degrees
-Overload protection
-Input low voltage protection
-Input high voltage protection
-Low battery alarm
-Low battery shut-down
2. Description:
-PURE SINE WAVE Inverters
-It is appropriate for the motor; fan; pump and inductive loads.
-Motor makes noise with modified sine wave but pure sine wave is fine to work.
| Model No. | PM-1200L-12 | PM-1200L-24 | PM-1200L-48 |
| Output power continuous | 1200W | 1200W | 1200W |
| Max. Surge power | 2400W | 2400W | 2400W |
| AC Output Voltage | 100V ~ 120Vac ± 1~2%or 200V ~ 240Vac ± 1~2%; Adjustable by front panel | ||
| Output Voltage Regulation | -1.5% ~ +1.0% | -1.5% ~ +1.0% | -1.5% ~ +1.0% |
| DC Input Voltage | 12VDC (10~16VDC) | 24VDC (20~32VDC) | 48VDC (42~62VDC) |
| Efficiency | 87% | 87% | 87% |
| Distortion (THD) | <2% | <2% | <2% |
| Output frequency | 50Hz or 60Hz ± 0.5% | 50Hz or 60Hz ± 0.5% | 50Hz or 60Hz ± 0.5% |
| No Load Current | |||
| Input Low & high Voltage Prot. | Yes | Yes | Yes |
| Input & Output Short Circuit Prot. | Yes | Yes | Yes |
| Overload & shut-down | Yes | Yes | Yes |
| Temperature control fan | Yes | Yes | Yes |
| Over temperature shut-down | Yes | Yes | Yes |
| Soft Start | Yes | Yes | Yes |
| Reverse Polarity Protection | Yes (By Fuse) | Yes (By Fuse) | Yes (By Fuse) |
| Green Power Function | Yes (by front panel) | Yes (by front panel) | Yes (by front panel) |
| Green Power Recovery Time | 1 Second | 1 Second | 1 Second |
| Remote Control Interface | Yes | Yes | Yes |
| Accessory | DC cable with O-ring | DC cable with O-ring | DC cable with O-ring |
| Dimensions (L x W x H mm) | 465 × 280 × 120 | 465 × 280 × 120 | 465 × 280 × 120 |
| Gross weight (by Kg/s) | 14.00 | 14.00 | 14.00 |
| Output Waveform (Pure sine wave) | ![]() | ![]() | ![]() |