Solar Inverters (Solar Equipments)

Detail Information

Description :

1. Character:
-Multiple microprocessor design base.
-Compatible with both linear & non-linear load.
-Stronger charger to support batteries of 600AH up.
-24 hours operation on the inverter.
-DC start and automatic self-diagnostic function.
-THD less than 3%.
-High efficiency design to save electricity.
-Low heat dissipation in long time operation.
-Design to operate under harsh environment.
-3U 19" Rack Mount or WALL Mounted design.
-DC priority or AC priority selectable.
-Support solar panel

2. Description:
-Solar Inverter with LCD Display~
PURE SINE WAVE Inverter with DC battery charger and Solar charge controller.
-Connect directly with Solar system.
-Smart; powerful and successful.

Specification :

Model				PM-2400SLU-24
Capacity	VA / Watt			3.6KVA / 2400W
Input	Nominal Voltage			220Vac ; 110Vac
	Voltage Range	Acceptable Voltage Range		120-280Vac ; 60-140Vac
		Frequency		50Hz / 60Hz ( 45Hz - 70Hz)
		Line Low Transfer		120VAC ± 2% ; 60VAC ± 2%
		Line Low Return		130VAC ± 2% ; 65VAC ± 2%
		Line High Transfer		280VAC ± 2% ; 140VAC ± 2%
		Line High Return		260VAC ± 2% ; 130VAC ± 2%
Output	Voltage			200 / 220 / 230 / 240Vac (re-settable via LCD panel) 100 / 110 / 115 / 120Vac (re-settable via LCD panel)
	Voltage Regulation (Batt. Mode)			< 3% RMS for entire battery voltage range
	Frequency			50Hz or 60Hz
	Frequency Regulation (Batt. Mode)			± 0.1Hz
	Power Factor			0.67
	Waveform			Pure Sinewave
	Effiecincy			> 80%
	Overload Protection		Line Mode	Circuit Breaker
			Battery Mode	110% ~ 150% for 30 sec. ; >150% for 200ms
Transfer Time	Typical			< 8 ms.
Battery	Battery Voltage			24Vdc (20~32)
	Backup Time (at full load)			long time available
	Max. Charging Current (3 steps selectable)			60 / 80 / 100 Amp
Solar Charge	Battery Voltage			24V
	Charge Voltage			27.7V
	Solar Maximum Peak Voltage			50.0V
	Solar Charge Working Voltage			24.0V
	Maximum Charging Current			50A
	Polarity Protect			YES
	Back Flow Protect			YES
Display LCD	LCD			UPS status; I/P&O/P Voltage Frequency; Load%; Battery Voltage & %; Charge current; Temperature; Model
	LED			Normal (Green); Warning (Yellow); Fault (Red)
Audible Alarm	Battery Mode			Beeping every 4 seconds
	Low Battery			Beeping every second
	UPS Fault			Beeping Continuously
	Overload			Beeping twice per second
Environment	Operation Temperature			0-40 °C ; 32-104 °F
	Relative Humidity			0-95% non-dondensing
	Audible Noise			Less than 55dBA (at 1M)
Physical	Net Weigh (Kgs)			23
	(WxHxD) mm Black Case			298 x 450 x 150
	(WxHxD) mm Rack Mount			440 x 132 x 360
	(WxHxD) mm Wall Mounted			298 x 450 x 190

* Specifications are subjected to change without prior notice.