Ares Machinery Co., Ltd.
Tel:886-4-24925555 Fax:886-4-24966959
Address:No. 256, Tu Cheng Rd., Da-Li Dist., Taichung City 412, Taiwan
Detail Information
Description :
◾Standard spindle speeds 10,000 rpm
◾Optional spindle speeds 12,000 / 15,000 / 20,000 rpm / 24,000 rpm (Mitsubishi)
◾Rigid tapping 4,000rpm
◾Spindle nose taper BT30
◾3 axes rapid traverse X, Y, Z: 48 / 48 / 48 m/min
◾Fully enclosed heat isolated electric cabinet
◾High Speed mechanical ATC system T-T: M 2.0 sec F 3.0 sec
◾Directly coupled spindle drive system
Specification :
| Unit | R12030 | ||
| Table size | mm | 1300 x 530 | |
| Max. Table load | kg | 400 | |
| X, Y, Z axis travel | mm | 1200 x 500 x 300 | |
| Table to spindle nose | mm | 170 ~ 470 | |
| Spindle taper | BT30 | ||
| Pull stud | MAS403 P30T-1 (45º) | ||
| Spindle motor | Mitsubishi | kw | 5.5 / 3.7 |
| FANUC | kw | 3.7 / 2.2 | |
| X drive motor | Mitsubishi | kw | 3.5 |
| FANUC | kw | 3.0 | |
| Y drive motor | Mitsubishi | kw | 3.5 |
| FANUC | kw | 3.0 | |
| Z drive motor | Mitsubishi | kw | 3.5 |
| FANUC | kw | 4.0 | |
| Spindle speeds | rpm | 10000 | |
| X, Y, Z axis rapid traverse | m/ | 48 / 48 / 48 | |
| Magazine capacity | 14 | ||
| Max. tool weight | kg | 3 | |
| Max. tool length | mm | 200 | |
| ATC time | sec | M 2.0 / F3.0 (T-T) | |
| Net weight | kg | 4500 | |
| Floor space | mm | 2900 x 3270 x 2940 | |
* Tool change time supplied with standard 60Hz power and based on Mitsubuishi controller. For electrical requirements other than this standard, please contact one of our personnel.
Ares Machinery Co., Ltd.
- Taiwan
- No. 256, Tu Cheng Rd., Da-Li Dist., Taichung City 412, Taiwan
- 886-4-24925555
- 886-4-24966959