Ares Machinery Co., Ltd.
Tel:886-4-24925555 Fax:886-4-24966959
Address:No. 256, Tu Cheng Rd., Da-Li Dist., Taichung City 412, Taiwan
Detail Information
Description :
◾Spindle speed STD. 8000rpm
OPT. 12000rpm
15000rpm
◾Spindle motor Mitsubishi 7.5/5.5 kw
Fanuc 7.5/5.5 kw
Siemens 10.5/7.0 kw
◾Rapid traverse X,Y,Z: 48/48/48 m/min
◾X axes travel 400mm
◾Y axes travel 500mm
◾Z axes travel 450mm
◾Tools capacity 24+1 tools
◾ATC time (T-T) 2.4sec
◾Table size Ø250 mm / Ø320 (OP) mm
Specification :
| Unit | A5X404 | ||
| Table size | mm | Ø250 / Ø320 (OP) | |
| Max. Table load | kgf | 75 | |
| Max. Workpiece dimennsion (Ø × height) | mm | Ø448 × 250 | |
| Min. indexing precision of C axis rotary | degree | 0.001 | |
| Cumulative indexing precision of C axis | sec | 15 | |
| C axis repeatability accuracy | sec | 6 | |
| Slope angle of A axis | degree | +120 / - 40 | |
| Cumulative indexing precision of A axis | sec | 45 | |
| A axis repeatability accuracy | sec | 8 | |
| Max. Speeds for A, C axis | rpm | 13.3 / 22.2 | |
| X, Y, Z axis travel | mm | 400 × 500 × 450 | |
| 3 axes rapid traverse | m/min | 48 / 48 / 48 | |
| 3 axes bidirectional accuracy of positioning | mm | VDI 3441 | |
| 3 axes bidirectional repeatability of positioning | mm | VDI 3441 | |
| Spindle speeds | rpm | 8000 | |
| Spindle taper | BT40 | ||
| Pull stud | MAS 403 P40T-1(45° ) | ||
| Spindle driving | Direct-drive | ||
| Spindle nose to table | mm | 40 ~ 490 | |
| Spindle center to Z path | mm | 570 | |
| Spindle motor | Mitsubishi | kw | 7.5 / 5.5 |
| Fanuc | kw | 7.5 / 5.5 | |
| Siemens | kw | 10.5 / 7.0 | |
| X drive motor | Mitsubishi | kw | 1.5 |
| Fanuc | kw | 1.6 | |
| Siemens | kw | 2.3 | |
| Y drive motor | Mitsubishi | kw | 2.2 |
| Fanuc | kw | 2.7 | |
| Siemens | kw | 2.3 | |
| Z drive motor | Mitsubishi | kw | 3.0 |
| Fanuc | kw | 3.0 | |
| Siemens | kw | 3.3 | |
| A drive motor | Mitsubishi | kw | 3.5 |
| Fanuc | kw | 4.0 | |
| Siemens | kw | 3.3 | |
| C drive motor | Mitsubishi | kw | 1.5 |
| Fanuc | kw | 1.6 | |
| Siemens | kw | 2.3 | |
| Tools capacity | tools | 24+1 | |
| Max. tool weight | kg | 5 | |
| Max. tool length | mm | 250 | |
| Max. tool diameter (alternate pocket empty) | mm | 80 （120） | |
| ATC time (T-T) | sec | 2.4 | |
| Tool Change type | Arm type | ||
| Tank volume | L | 260 | |
| Coolant pump rate | W | 600 × 2 pcs | |
| Flow rate | L/min | 136 | |
| Chip flush type | Flushing type | ||
| Auto. Chip conveyor | OP | ||
| Net weight | kg | 4300 | |
| Floor space | mm | 2170 × 3032 × 2657 |
- Tool change time supplied with standard 60Hz power. For electrical requirements other than this standard, please contact one of our personnel.
- The company reserves the right to modify the specifications / design, subject to change without further notice.
Actual specifications, based on order content.
Ares Machinery Co., Ltd.
- Taiwan
- No. 256, Tu Cheng Rd., Da-Li Dist., Taichung City 412, Taiwan
- 886-4-24925555
- 886-4-24966959