TANSHING ACCURATE INDUSTRIAL CO., LTD.
Taiwan 4th & 5th Axis Rotary Table, Pneumatic & Hydraulic Indexing Table Manufacturer
Detail Information
Description :
1.Servo motor position is not changed with shaft tilting to prevent vibration while cutting.
2.Absolute value motor are recommended for tilting axis.
Specification :
TRNC-321
| Specifications / Model | Unit | TRNC-321 | ||
|---|---|---|---|---|
| Worktable Diameter | Ømm | Ø320 | ||
| Table Height | Horizontal | mm | 350 | |
| Center Height | 90° | mm | 255 | |
| Overall Height | 90° | mm | 445 | |
| Center Bore Diameter | Ømm | Ø100H7 | ||
| Through-Hole Diameter | Ømm | Ø100 | ||
| Width Of T-Slot | mm | 14H7 | ||
| Width Of Guide Block | mm | 18H7 | ||
| Allowable Workpiece Diameter | Ømm | Ø320 | ||
| Tilting Angle | deg. | ±110° | ||
| Axis | Rotation | Inclination | ||
| Minimum Input Increment | deg. | 0.001° | ||
| Indexing Accuracy | sec. | 15"★15" | 60"★20" | |
| Repeatability | sec. | 4" | － | |
| Servo Motor (Model As Required) | FANUC | aiF 8 | αiF 12 | |
| MELDAS | HF-154S | HF-204S | ||
| Speed Reduction Ratio | 1:120 | 1:360 | ||
| Table Rotation Speed | r.p.m | 25 | 8.3 | |
| Allowable Inertia Force | kg-cm-sec2 | 26 | ||
| Allowable Turntable Torque | kg-m | 26 | ||
| Drive Pressure / Method | kg/cm2 | 5 / Pneumatic | 5 / Pneumatic | |
| Clamping Torque | kg-m | ◎130 | ◎258 | |
| Allowable Load Capacity | 0° | kg | 200 | |
| 0°~90° | 100 | |||
| Net Weight (Motor Excluded) | kg | 450 | ||
- Note：
- 1. "★" Means with encoder of HEIDENHAIN ECN-2XX series.
2. "◎" Means With built-in Pneumatic/Hydraulic converter.
TRNC-A400
| Specifications / Model | Unit | TRNC-A400 | ||
|---|---|---|---|---|
| Worktable Diameter | Ømm | Ø400 | ||
| Table Height | Horizontal | mm | 440 | |
| Center Height | 90° | mm | 440 | |
| Overall Height | 90° | mm | 690 | |
| Center Bore Diameter | Ømm | Ø180H7 | ||
| Through-Hole Diameter | Ømm | Ø180 | ||
| Width Of T-Slot | mm | 14H7 | ||
| Width Of Guide Block | mm | 18H7 | ||
| Allowable Workpiece Diameter | Ømm | Ø400 | ||
| Tilting Angle | deg. | ±110° | ||
| Axis | Rotation | Inclination | ||
| Minimum Input Increment | deg. | 0.001° | ||
| Indexing Accuracy | sec. | 15" | 60" ★20" | |
| Repeatability | sec. | 4" | － | |
| Servo Motor (Model As Required) | FANUC | αiF 12 | αiF 12 | |
| MELDAS | HF-204S | HF-354S | ||
| Speed Reduction Ratio | 1:120 | 1:180 | ||
| Table Rotation Speed | r.p.m | 25 | 16.6 | |
| Allowable Inertia Force | kg-cm-sec2 | 61 | ||
| Allowable Turntable Torque | kg-m | 30 | ||
| Drive Pressure / Method | kg/cm2 | 35 / Hydraulic | 35 / Hydraulic | |
| Clamping Torque | kg-m | 110 | 170 | |
| Allowable Load Capacity | 0° | kg | 250 | |
| 0°~90° | 125 | |||
| Net Weight (Motor Excluded) | kg | 1300 | ||
- Note：
- 1. "★" Means with encoder of HEIDENHAIN ECN-2XX series.
2. "◎" Means With built-in Pneumatic/Hydraulic converter.
TRNC-500A
| Specifications / Model | Unit | TRNC-500A | ||
|---|---|---|---|---|
| Worktable Diameter | Ømm | Ø500 | ||
| Table Height | Horizontal | mm | 520 | |
| Center Height | 90° | mm | 570 | |
| Overall Height | 90° | mm | 780 | |
| Center Bore Diameter | Ømm | Ø50H7 | ||
| Through-Hole Diameter | Ømm | - | ||
| Width Of T-Slot | mm | 18H7 | ||
| Width Of Guide Block | mm | 18H7 | ||
| Allowable Workpiece Diameter | Ømm | Ø500 | ||
| Tilting Angle | deg. | -30°~+110° | ||
| Axis | Rotation | Inclination | ||
| Minimum Input Increment | deg. | 0.001° | ||
| Indexing Accuracy | sec. | 15" (Gear) ★20" (Belt) | ★20" (Belt) | |
| Repeatability | sec. | 4" | － | |
| Servo Motor (Model As Required) | FANUC | αiF 12 | αiF 30 | |
| MELDAS | HF-354S | HF-703S | ||
| Speed Reduction Ratio | 1:120 | 1:120 | ||
| Table Rotation Speed | r.p.m | 25 | 25 | |
| Allowable Inertia Force | kg-cm-sec2 | 204 | ||
| Allowable Turntable Torque | kg-m | 78 | ||
| Drive Pressure / Method | kg/cm2 | 35 / Hydraulic | 35 / Hydraulic | |
| Clamping Torque | kg-m | 250 | 450 | |
| Allowable Load Capacity | 0° | kg | 300 | |
| 0°~90° | 200 | |||
| Net Weight (Motor Excluded) | kg | 2300 | ||
- Note：
- 1. "★" Means with encoder of HEIDENHAIN ECN-2XX series.
2. "◎" Means With built-in Pneumatic/Hydraulic converter.
TRNC-650A
| Specifications / Model | Unit | TRNC-650A | ||
|---|---|---|---|---|
| Worktable Diameter | Ømm | Ø650 | ||
| Table Height | Horizontal | mm | 300 | |
| Center Height | 90° | mm | 350 | |
| Overall Height | 90° | mm | 622.5 | |
| Center Bore Diameter | Ømm | Ø50H7 | ||
| Through-Hole Diameter | Ømm | - | ||
| Width Of T-Slot | mm | 18H7 | ||
| Width Of Guide Block | mm | - | ||
| Allowable Workpiece Diameter | Ømm | Ø500 | ||
| Tilting Angle | deg. | -100°~+110° | ||
| Axis | Rotation | Inclination | ||
| Minimum Input Increment | deg. | 0.001° | ||
| Indexing Accuracy | sec. | ★20" (Belt) | ★20" (Belt) | |
| Repeatability | sec. | 4" | － | |
| Servo Motor (Model As Required) | FANUC | a iF 12 | a iF 30 | |
| MELDAS | HF-354S | HF-703S | ||
| Speed Reduction Ratio | 1:120 | 1:120 | ||
| Table Rotation Speed | r.p.m | 25 | 25 | |
| Allowable Inertia Force | kg-cm-sec2 | 204 | ||
| Allowable Turntable Torque | kg-m | 78 | ||
| Drive Pressure / Method | kg/cm2 | 35 / Hydraulic | 35 / Hydraulic | |
| Clamping Torque | kg-m | 250 | 450 | |
| Allowable Load Capacity | 0° | kg | 300 | |
| 0°~90° | 200 | |||
| Net Weight (Motor Excluded) | kg | 1220 | ||
- Note：
- 1. "★" Means with encoder of HEIDENHAIN ECN-2XX series.
2. "◎" Means With built-in Pneumatic/Hydraulic converter.
TANSHING ACCURATE INDUSTRIAL CO., LTD.
- Taiwan
- No 1-1, Lane 165, Sec, 1, Tan-shing Rd., Taichung City 42743, Taiwan
- 886-4-25384978
- 886-4-25384980