Blowing Film Machinery

Model No: N/A
Factory Location: Taiwan
Sample Request: No
Target Markets: Worldwide

Product Name: Blowing Film Machinery

Model	HL45W650	HL55W1000	HL65W1200
a) Material To Be Used:	HDPE/LDPE/LLDPE
b) Layflat Film Width:	MAX:550	MAX:900	MAX:1100
c) Extrusion Output:	MAX:38~45Kg/Hr	MAX:60~80Kg/Hr	MAX:120~140Kg/Hr
d) Film Thickness:	HDPE 0.015mm~0.15mm / LDPE: 0.02-0.2mm
EXTRUDER
a) Screw Dia.:	45mm, L/D=30:1	55mm, L/D=30:1	65mm, L/D=30:1
b) Gear Box:	15HP	30HP	50HP
c) Driving Motor:	15HP	30HP	50HP
d) Air Cooling Fan:	2pcs	3pcs	4pcs
EXTRUSION DIE & COOLING EQUIPMENT
a) Die Head:	HDPE50~80mm	HDPE90~120mm	HDPE150~180mm
c) Filter:	45mm	55mm	65mm
d) Air Blower:	3HP	5HP	7.5HP
CONTROL PANEL
a) Type:	Individual Box
b) Heating Zone:	5 Point Temperature Control	6 Point Temperature Control	7 Point Temperature Control
TAKE-UP UNIT
a) Type:	Tower Fixed Type
b) Tower Height:	3.5M	5.5M	6.5M
c) Take-Up Roller Width:	650mm	1000mm	1200mm
d) Take-Up Motor:	1/2HP + Inverter Control	1HP + Inverter Control	1HP + Inverter Control
f) Take-Up Plate:	Wood Type / Aluminum Roller Type
g) Guide Roller:	X	20kg/cm Torque Motor
h) Stabilizer:	M450	M650	M765
WINDING UNIT
a) Type:	Single Station Manual Type
b) Working Method:	Surface Friction Type
c) Wound-Up Dia.:	MAX. 800mm
d) Winding Motor:	30kg/cm Torque Motor	40kg/cm Torque Motor	A.C 1HP+TQ Motor Control
e) Winding Shaft	2pcs
OPTIONAL DEVICE
AUTO LOADER. GRAVIMETRIC DOSING UNIT. LD/LLDPE DIE HEAD & AIR RING. ROTARY UNIT. BUBBLE CAGE. WIDTH CONTROLLER. OSCILLATING / VERTICAL TAKE-UP UNIT. EMBOSSING DEVICE. SURFACE TREATER. CHILLER. EDGE POSITION CONTROL. BACK TO BACK WINDING UNIT. ELECTRONIC TENSION CONTROL. HEAT SLITTING DEVICE. AIR SHAFT.

* Specifications are subject to change without prior notice.