Content :

* Description
Shot-circuit annealing machine, mainly for anneal heaters which after reducing. After annealing, the heaters will become soft for next bending.
The machine uses a dry-type transformer, equipped with a pneumatic clamping mechanism to clamp the pipe on the electrode at both ends, using a low-voltage, high-current to create short-circuit to heat and anneal with metal-shell.
The annealing machine with shower cooling will automatically spray and cool after annealed.
Auto Anneal Machine is with load and unload tubular heaters to anneal automatically.
PS: The anneal machine only anneal part of heater, can not anneal the whole heater.
* Main details
1. Anneal length: 200mm to max length according to order.
2. Anneal diameter: 6-16mm (need to change mold).
3. With 7-8 grade to adjust voltage according to diameter of heater and material.
4. Pneumatic clamping.
5. For auto anneal machine, heater auto feed to anneal, auto anneal, auto unload annealed heater.