Content :

FM-20 Foamed Concrete Machine
I. Working Process
FM-20 mixes cement, fly ashes, and water in a ratio in the mixer into cement slurry, and then transport cement slurry to pipeline through hydraulic feed cylinder. After foaming agent dilutes by water, it will be mixed with compressed air in a certain ratio, and therefore causes high density, closed-cell foam in the pipeline. In the final step, this foam will mix with cement slurry and turn into final product, foam cement.
II. Technical Parameters
Value
Transporting Volume 20-25 m3/h
Maximum Vertical Delivery Height 120 m
Maximum Horizontal Delivery Distance 500 m
Main Motor Power 17.5 kw
Material Feeder Motor Power 1.5 kw
Mixer Motor Power 3.5 kw
Mixer pumping Height 1000 mm
Pump Dimension 2100x1500x1300 mm
Mixer Dimension 1800x700x800 mm
Material Feeder Dimension 4500x500x450 mm
Important Note: Above technical data are theoretical data, it depends on density of the foamed concrete. Generally, lower density, higher pumping height.

III. Properties and Performance
By adopting double cylinder hydraulic press to deliver concrete, FM-20 is able to meet the need of constructing higher buildings because of its higher pumping ability.
1. Semi-automatic controlling system controls mixing ratio of variety of materials refilling process; also capable of loading materials and refilling water.
2. Easy to operate.
3. Stabilized function and performance.
4. Density is easy to adjust.
5. Flexible mobile and positioning ability.
IV. Foamed concrete machine is widely used in roof insulation, for instance, heat preservation and insulation. Its effectiveness is 20-30 times better than a normal material. Therefore, buildings from top to bottom floors have all year comfortable temperature by adopting foamed concrete materials. It is idealized equipment for producing lightweight concrete.