656064128

TAILIFT CO., LTD.

Tel:886-49-2254300       Fax:886-49-2254302
Address:No.170, Chenggong 3rd Rd., Nantou City, Nantou County 54066, Taiwan

Products

Hydraulic Clamping Radial Drilling Machines

Hydraulic-Clamping-Radial-Drilling-Machines-2

  • Model No: TC1250H
  • Factory Location: Taiwan
  • Sample Request: No
  • Target Markets: Worldwide

Detail Information

Description :

1.The Radial Drill Arm adopts IC Timer with advantage of one bottom press, it can automatically release up and vertical down, stop, and automatically clamping easy to operate. The spindle can still maintain in original set after the tools change.
2.Exclusively for gears type cycling oil pump is furnished to cool off precise gears inside gear box, and minimize excessive wear on gears to lowest extent.
3.Friction type disc clutch is adopted to absorb impact force caused by vertical movement of spindle, and effectively protect all transmission unit inside gear box. With the function of quick spindle return, this clutch will also help us to speed up our tapping operation.
4.Special arm elevating safety device is provided to prevent arm from falling down abruptly after year of usage . It will keep us from injurious dropping whenever the copper nut is excessively worn.
5.Equipped with hydraulic STEP BY STEP clamping system, with proper selection on push button switch, column, arm, gear box can be clamped/released independently.

Specification :

MODELTPR-1230H 
Dai.of column330A
Distance from column surface to spindle center , Max1170D+C
Distance from column surface to spindle center , Min340C
Travel of spindle head890D
Distance from base surface to spindle end , Max1370E
Distance from base surface to spindle end , Min490F
Elevating height of Arm630E-F-I
Effective area of box table635×520×415L×K×H
Dimension of base1725×715×180R×S×Q
Taper hole spindleMT#4 
Stroke of spindle250I
R.P.M of spindle (rpm x steps)44-1500×12 steps 
Feed of spindle (rev. x steps)0.05 , 0.09 , 0.15×3 steps 
Main motor (HP)3HP 
Elevating motor (HP)1HP 
Hydraulic clamping motor (HP)1HP 
Coolant equipment (HP)1/8 HP 
Machine height from floor (Max.)2780M
Base + column height2060G
Net weight (approx)kgs2100 
Shipping weight (approx)kgs2300 
Shipping dimensions (LxWxH)2035×995×2240 
CapacityDrillingStell42Ø 
Cast iron55Ø 
TappingStell25Ø 
Cast iron38Ø

TAILIFT CO., LTD.

  • Taiwan
  • No.170, Chenggong 3rd Rd., Nantou City, Nantou County 54066, Taiwan
  • 886-49-2254300
  • 886-49-2254302
  • 656064128