Description :

* The bed, column, saddle and table are manufactured from high quality Meehanite cast iron, stress relieved for high stability.
* All slideways are hardened, precision ground, then coated with Turcite-B for maximum wear resistance.
* The X, Y axes are protected by stainless steel telescopic covers.
* The X, Y axis drive employs high precision lead screws, combined with double nuts, ensuring high accuracy of feed.
* The spindle runs on precise angular contact bearings.
* The spindle is precision manufactured from SCM21 alloy steel, heat treated and precision ground.
* All gears in milling head are hardened and precision ground for quiet running.
* The X-axis feed is driven by a high torque servo motor, providing variable feed speed.
* The powerful spindle motor gives a high chip removal rate.
* Choice of Fanuc or Mitsubishi CNC controller.
* All models can be converted into CNC controlled system.

Specification :

Model			VH650B
Table	Table size	mm	2200x600
	X axis travel	mm	1700
	Y axis travel	mm	1050
	Z axis travel	mm	950
	T-Slot(width x trough number x pitch)	mm	20x5x125
	X Feedrate (variable)	mm/min	30~2800
	Y Feedrate (variable)	mm/min	30~2800
	Z Axis feedrate (variable)	mm/min	30~2800
	X Axis Rapid travel	mm/min	2800
	Y Axis Rapid travel	mm/min	2800
	Z Axis rapid travel	mm/min	2800
Range of cutting reference	Cutting length (parameter)	mm	1700
	Cutting width (parameter)	mm	620
	Cutting height (parameter)	mm	620
	Loading weight (parameter)	kgs	2000
Spindle (Vertical)	Spindle speed R.P.M(60HZ)	RPM	45~1500 (18 steps)
	Spindle taper		NT50
	Distance of Spindle nose to table surface	mm	0-753
	Distance of spindle center to column	mm	650
Spindle (Horizontal)	Spindle speed R.P.M(60HZ)	RPM	45~1500  (18 steps)
	Spindle taper		NT50
	Distance of Spindle center to table surface		-10~940
	Distance of spindle nose to table surface		290
Power	Spindle motor		-10~940
	X axis feed motor		2HP
	Y axis feed motor		2HP
	Z axis feed motor		2HP
Packing Dimension	LxWxH (after packing)	mm	3670x2300x2510
	Net weight (before packing)	kgs	7500KG
	Gross weight (after packing)	kgs	8500KG

Features :

1. SPINDLE LUBRICATION SYSTEM
2. PRACTICAL TELESCOPIC COVER
3. RUGGED SADDLE
4. INTEGRATED AUTO LUBRICATING
5. VERTICAL AND HORIZONTAL MILLING HEAD
6. 5-SIDE MACHINING IS AVAILABLE

• 
  Horizontal Machining Centre
• 
  Horizontal Machining Centers
• 
  Horizontal Machining Centers
• 
  JMH630 Horizontal Machining Center
• 
  Horizontal Machining Centers
• 
  JMH800 Horizontal Machining Center
• 
  Horizontal Machining Centers