JIH-I Machinery Co., Ltd.

Taiwan Manufacturers, Exporters.


JIH-8 Wood Working Sawing Machine

wood working machine

  • Model No: JIH-8
  • Factory Location: Taiwan
  • Sample Request: No
  • Target Markets: Worldwide

Detail Information

Description :

1. Accurate ripping operation: the saw carriage runs with bronze wheel, which is CNC lathe precision machined for accurate concentricity producing fine smooth surface cut the guide rods, hard chrome plated, provide rigid support for saw carriage. The ripping accuracy is guaranteed.
2. Pressure beam: the uniform holding pressure through the entire pressure beam is achieved through a linkage mechanism, ensuring synchronized cylinder actuation at both side.
3. Fence: made of extruded aluminum alloy, and surface precision ground. Thefence is fitted with a flip over stop for convenient repetitive cutting. Ascale is furnished for reading of width of cut.
4. Comprehensive safety guard: once the emergency stop button is pressed, or safety bar is actuated by operator's hand in an unsafe place, the saw operation immediately stop. Blade lowers under table, and pressure beam raise up to release the panel.
5. Warning lamp: a warning lamp is furnished that giving operator a visible alert in event overload cutting occurs.
6. Efficient dust collection: dust chute is covered with a split rubber to form a totally enclosed dust collection system, and fully prevent the hose broken result form it's fatigue.

Specification :

Model: 8/10/ 12: 1. Capacity (1) Maximum: length of cut: 2650mm, 3250mm, 3850mm. (2) Maximum depth of cut: 80mm, 80mm, 80mm. 2. Main: (1) Sawblade blade diameter: Ø 355mm, Ø 355mm, Ø 355mm (2) Arbor diameter: Ø 1", Ø 1", Ø 1". (3) Speed: 3200 / 4800R.P.M., 3200 / 4800R.P.M., 3200 / 4800R.P.M. 3. Scoring: (1) Sawblade blade diameter: Ø 160mm, Ø 160mm, Ø 160mm. (2) Arbor diameter: Ø 1", Ø 1", Ø 1". (3) Speed: 4000 / 6000R.P.M., 4000 / 6000R.P.M., 4000 / 6000R.P.M. 4. Saw: (1) Carriage: Feed forward speed 12-16-21-26 M/min 12-16-21-26 M/min 12-16-21-26 M/min. (2) Retract speed: 24-32-42-52 M/min 24-32-42-52 M/min 24-32-42-52 M/min. (3) Motor Main sawblade motor: 15 / 13HP 15 / 13HP 15 / 13HP. (4) Saw carriage drive motor: 3HP, 3HP, and 3HP. (5) Working air pressure: 5-6kg/cm 2, 5-6kg/cm 2, 5-6kg/cm 2. (6) Worktable height: 820mm, 820mm, 820mm. (7) N.W.: 2200kg 24200kg 2600kg. (8) G.W.: 2600kg 2900kg 3200kg. (9) Machine dimensions: 206"x132"x72" 230"x132"x72" 253"x132"x72" (10) Packing dimensions: 218"x40"x59" 230"x40"x59" 260"x40"x59"

JIH-I Machinery Co., Ltd.

  • Taiwan