Switching Power Supply : From Taiwan & China Reliable Switch Mode Power Supply Manufacturers & Suppliers


Silver Manufacturers

  • ( Origin : Taiwan Manufacturer & Supplier )
    Hang Ji Group specializes in selling automobile and motorcycle parts and accessories, such as glow plugs, Switching Power Supply, engine cylinder gaskets & oil seal, suspension parts, brake and clutch assemblies, bearings, etc. Due to keen competition nowadays, we have entered China market and aggressively sought reliable sources there. For 30 years experiences, we have accumulated scores of valuable information. And, in 2001, we set up an office in NingBo City, China responsible for purchasing China products. Our products are primarily exported to Southeast Asia and Mid East before 1990 and now Europe and America. By our abundant information, we firmly believe that we can provide you upper-quality and competitive edges products. Further, we create great business opportunities and benefits...
  • ( Origin : Taiwan Manufacturers & Suppliers )
    Established in 1989, Fwu Yih Brass Enterprise Co., Ltd. is specialized in copper products and engaged in the development of copper parts. After years of hard work, we are able to provide a wide selection of products such as valves, adapters, connectors, pu tubes, Switching Power Supply, sprinklers, etc. Over one thousand of products and thousands of speculations, our products mainly apply for hydraulic pressure and oil pressure accessories and also for water, gas, automotive and electronic parts and accessories. For better quality, lower cost and new product development, we have purchased latest machines and equipments in succession these years for market demands, which also presents our spirits of innovation.

Products Catalog

  • Switching Power Supply
    The UK Type Switching Power Supply with Short Circuit Protection and One Year Warranty Key Specifications/Special Features: Specifications: *Power: 15W *Input voltage: 100 to 240V AC *Frequency range: 50/60Hz, 0.2A *Customized designs are welcome *Output with low ripple noise *Warranty: one year *Lightweight and high efficiency *Reliable and stable *Over-voltage, over-current and short circuit protection *Working temperature: 0 to 40°C *Working humidity: 10 to 90% RH *Storage temperature: -20 to 85°C *Storage humidity: 5 to 95% RH *With BS, CB, CE and RoHS marks
  • 120W Quad Output Switching Power Supplies
    1. Miniature. 2. AC input 176 - 264V only. 3. Protections: SCP/ OLP/ OVP. 4. High reliability, low cost. 5. 100% full load burn-in test.
  • LTE 250U Series 185W Multiplte Output Switching Power Supplies
    Application: 1. Computer Peripherals/LAN&HUB 2. Test & Industral Equipments 3. Medical Instruments 4. Telecommunitions
  • 240W, Dual Output, Din Rail Power Supply, Switching Power Supply
    # 240W / Dual Output # -Universal input range(100~240VAC/47~63Hz) -High Power density -RoHs, CE, CB, TUV, UL certification -3-year warranty -Great reliability -Convection cooled -Over voltage protection -Overload protection -Short circuit protection -DIN Rail / Wall Bracket mounting solution Our DIN Rail Power Supplies are used by electric machine and battery charger appliances. With the rigid and compact appearance plus DIN rail / wall bracket mounting, our DIN Rail Power Supplies are saving space and industrial application. As universal Power supplies, they Supply output 240 W. In addition, AD2240F provides Dual Output for multiple needs. The devices are available with output voltages of 5/12, 5/24, and 5/48 VDC. They have a high efficiency up to 82%. Every model has built-in...
  • Switching Power Supplies
    Features: 1. Industry standard footprint: 5" x 3.5" x 0.68 " ( 127 x 88.9 x 17.3mm3). 2. Typical efficiency: 82%. 3. Wide input voltage: 36 - 75V. 4. Dual outputs: 5V / 12V. 5. Remote control. 6. Trim and sense function. 7. Input under-voltage shutdown. 8. Output over-current protection. 9. Output over-voltage protection. 10. Output short-circuit protection. 11. Over-temperature protection. 12. No minimum load requirement. 13. Basic isolation.
  • Switching Power Supplies
    Features: 1. Industry standard footprint: 2" x 1" x 0.4" ( 50.80 x 25.40 x 10.16mm3). 2. Typical efficiency: 84%. 3. Wide input voltage: 36 - 75V. 4. Single output: 3.3V, 5V. 5. Remote control. 6. Trim and sense function. 7. Input under-voltage shutdown. 8. Output over-current protection. 9. Output over-voltage protection. 10. Output short-circuit protection. 11. No minimum load requirement. 12. Basic isolation.
  • Switching Power Supplies
    Features: 1. Industry standard footprint: 2.4" x 2.28" x 0.36" ( 61.0 x 57.9 x 9.2mm3). 2. Typical efficiency: 90%. 3. Wide input voltage: 36 - 75V. 4. Single output: 3.3V, 5V. 5. Remote control. 6. Trim and sense function. 7. Input under-voltage shutdown. 8. Output over-current protection. 9. Output over-voltage protection. 10. Output short-circuit protection. 11. Over-temperature protection. 12. No minimum load requirement. 13. Basic isolation.
  • 150W Single Output Switching Power Supplies
    1. Miniature. 2. AC input 176 - 264V only. 3. Protections: SCP/ OLP/ OVP. 4. High reliability, low cost. 5. 100% full load burn-in test.
  • Switching Power Supplies
    Features: 1. Approved to IEC/ EN60950, UL60950 safety standards. 2. Industry standard footprint: 2" x 2" x0.38 " ( 50.8 x 50.8 x 9.66mm3). 3. Typical efficiency: 87%. 4. Wide input voltage: 36 - 75V. 5. Single output: 3.3V, 5V. 6. Trim function. 7. No minimum load requirement. 8. Basic isolation.
  • Switching Power Supplies
    Features: 1. Approved to IEC/ EN60950, UL60950 safety standards. 2. Industry standard footprint: 2" x 2" x 0.38 " ( 50.8 x 50.8 x 9.66mm3). 3. Typical efficiency: 89%. 4. Wide input voltage: 36 - 75V. 5. Single output: 3.3V, 5V. 6. Trim function. 7. No minimum load requirement. 8. Basic isolation.
  • Switching Power Supplies
    1. Point of load (POL) applications. 2. Open frame SIP. 3. Low output ripple and noise. 4. Positive enable function. 5. No minimum load requirement. 6. Fixed frequency Switching ( 300KHZ).
  • 60W, Dual Output, Enclosed Power Supply,  Switching Power Supply
    # 60W / Dual Output # -Universal input range(100~240VAC / 47~400Hz) -High Power density -RoHs, CE, CB, TUV, UL certification -3-year warranty -Great reliability -Convection cooled -Over voltage protection -Overload protection -Short circuit protection Acro Engineering Inc. has dedicated to Switching mode Power Supply for over 15 years. There is a series of evolutional Switching mode powers supplies. Metal housing protects the parts and PC board against impact. Designed with multiple mounting solution, and diverse I/O connector for versatile applications. Active Power factor corrector is built-in the models over 60W output for complying EN61000-3-2requirements and features universal AC input range. External battery Supply back-up Power source for keeping DC output stable while AC...
  • Lte 30fs Series 30w Single Output Switching Mode Power Supplies
    Dimension: 2"x4"x0.96" mm (WxLxH) All The safety approvals applying ENVIRONMENTAL: OPERATING TEMPERATURE:0°C TO 50°C AMBIENT, DERATED EACH OUTPUT AT 2.5% PER °C FROM 50°C TO 70°C STORAGE TEMPERATURE:-40°C TO 85°C HUMIDITY:OPERATING, NON-CONDENSING, 5% TO 95% VIBRATION:RANDOM OPERATING 2.4 GRMS/MAX. 3 AXES 50~500Hz 10 MINUTES/AXIS SHOCK:OPERATING HALF SINE 20 GPK/MAX. 3 AXES 10mS 6 SHOCKS TOTAL
  • AC/DC Switching Power Supplies (150 Watts Single Outputs)
    1. CE, CB, UL & CUL Approval. 2. Universal AC input/full range. 3. High-efficiency and high reliability. 4. Output protections: SCP/OVP/OLP/OPP. 5. 100% full load burn-in test. 6. 3 years warranty. 7. Output voltage: 5/12/15/24/48V. 8. Input volt/freq: 85 to 264V AC/47 to 63Hz (210 to 370V DC). 9. Inrush current: 30 at 120, 60A at 230V AC (cold start). 10. PF: >0.98/120V AC. 11. PF: >0.94/230V AC. 12. Operating ambient: -10 to 60 degree Celsius, 20 to 90% RH (non condensing). 13. Safety standards: GB4943-2001, EN60950-1:2006. 14. EMC standards: EN55022 class B, EN 61000-4-2/-3/-4/-5/-6/-8/-11. 15. Dimension: 194 x 99 x 50mm.
  • Switching Power Supplies
    Features: 1. Approved to IEC/ EN60950, UL60950 safety standards. 2. Industry standard footprint: 1.65" x 1.46" x 0.4" ( 41.90 x 37.10 x 10.16mm3). 3. Typical efficiency: 81%. 4. Wide input voltage: 36 - 75V. 5. Single output: 3.3V, 5V, 12V, 15V. 6. Remote control. 7. Input under-voltage shutdown. 8. Output over-current, short-circuit protection ( not commended for 12V, 15V). 9. No minimum load requirement. 10. Basic isolation.
  • Switching Power Supply
    The UK Type Switching Power Supply with Short Circuit Protection and One Year Warranty Key Specifications/Special Features: Specifications: *Power: 12W *Input voltage: 100 to 240V AC *Frequency range: 50/60Hz, 0.2A *Customized designs are available *Output with low ripple noise *Warranty: one year *Lightweight and high efficiency *Reliable and stable *Over-voltage, over-current and short circuit protection *Working temperature: 0 to 40°C *Working humidity: 10 to 90% RH *Storage temperature: -20 to 85°C *Storage humidity: 5 to 95% RH *Certificates: BS, CB, CE and RoHS

Join This Directory

B2BManufactures.com is the online source of Taiwan and China manufacturers which help global buyers find and do business with 20,000 companies.

Want to join this directory ? Click here to inquire.
Not found ideal suppliers yet ? Click here.

Copyright © 2017, G.T. Internet Information Co.,Ltd. All Rights Reserved.