1. Powder feeding quantity adjusable: The powder feeding quantity can be microadjusted with the operation table. The r.p.m. of the aluminum capsule plate will be shown on the digital electronic indicator. 2. After all the empty capsules have been rightly rectified and filled up, the mechanism will stop automatically to reduce the operators working worries. 3. Additional manual control has been installed for easy and convenient testing. 4. Simple transmission mechanism, easy maintenance and less trouble possibility. 5. Beautiful and practical appearance designed, surface plate made of aluminum or stainless steel. Operation controls are all placed on upper side (most accessible.)

1. All stainless shell, body hopper and guide meeting G.M.P. requirements. 2. Feeding variable speed. 3. Conveying belt is special, durable & easy to clean. 4. No noise, no public hazard. 5. Simple operation, maintenance, and convenient to use. 6. Change guide from capsule to tablet within 10 minrtes, vice versa.

1. Empty gelatin capsules are fed from a storage hopper to the rectifier, and inserted with the aid of vacuum into one of the 12sets of carrier segments; each carrier segment holds 5empty capsules. 2. The carrier segment's upper holder holding the caps is now lifted; separation of cap and body is assisted by vacuum. 3. The upper holder starts retracting while the lower proceeds to the dosing station. 4. Complete retraction of the upper holder is done at this station. 5. Powder slug is inserted into the capsule body; when there is no capsule body held at the lower holder, the powder slug will be further pushed downward and collected in a receiver tray. 6. Two station reserved for attachments to fill pellets or other granulated products. 7. Two station reserved for attachments...

1. Highest efficiency. 2. Better accuracy. 3. Lower maintenance. 4. Easier operation. 5. The machine conforms to cGMP standards.

Firstly the tablets are guided into leading spring tubes via guide rails of a vibratory feeder.They are then fed into capsule bodies through a reciprocating pusher device in a safe and firm manner. The tablet feeding station can be installed before or after the powder or pellet feeding station.