656066016

Shin I Machinery Works Co., Ltd.

Tel:886-4-26238181       Fax:886-4-26232129
Address:No. 43, Chung Cheng St., Chingshui Dist., Taichung City 436, Taiwan

All Products

S-B10A Automatic Lining-Drying Machine
  • Model No:
    S-B10A
  • Product Description:
    S-B10A Automatic Lining- Drying Machine is specially designed for small round end. Curled end is separated by a pair of separating knives at end magazine ;then feeding bars send it to lining station. End is lifted up by a turning chuck. A mechanical ...
S-B63 Automatic Lining Machine
  • Model No:
    S-B63
  • Product Description:
    S-B63 Automatic Lining Machine is specially designed for small round end. Curled end is separated by a pair of separating knives at end magazine ;then feeding bars send it to lining station. End is lifted up by a turning chuck. Four sets of electroni...
Automatic Vertical Spin Flow Necker, Flanger With Twin Seamers Machine
  • Model No:
    S-B93
  • Product Description:
    S-B93 Automatic Vertical Spin Flow Necker, Flanger with Twin Seamers is specially designed for aerosol can, vertical design is easily linked and worked together with other machines. On station 1 and 2, spin flow system is introduced to easily neck an...
S-C2 Automatic Vacuum Seamer
  • Model No:
    S-C2
  • Product Description:
    S-C2 Automatic Vacuum Seamer is specially designed for round can closing under vacuum . Filled can is fed forward through a timing screw and a chain to enter a a pocket of index vacuum turret, with six pockets, to meet with end in vacuum seaming stat...
Automatic Five Gallon Square End Lining And Drying Machine
  • Model No:
    S-D25
  • Product Description:
    S-D25 Automatic Five Gallon Square End Lining and Drying Machine is designed for five gallon tin bottom end. Curled end is separated by a pair of separating knives on the end magazine; then, end is smoothly fed forward via two end pushing bars guided...
Automatic End Counter And Stacker Machine
  • Model No:
    S-B10AL2
  • Product Description:
    S-B10AL2 Automatic End Counter and Stacker is specially designed for big round end and is recommended to link with one set of lining/drying machine S-B10AL. Dried ends are guided by a chute to reach the inlet magnetic conveyor then enter collection c...
Automatic Gang Slitters ( Single )
  • Model No:
    S-B1A
  • Product Description:
    1. Big cutter shaft adopted to ensure strip dimension and squarness, 90 mm dia. for B1A, 100 mm dia. for B1B.
    2. Simple design, easy maintenance and changeover for different can sizes. Equipped with mechanical clampling system for cutter hubs. Carb...
Automatic Scoring Machines
  • Model No:
    S-B24A
  • Product Description:
    S-B24A Automatic Scoring Machine is designed for can body blank scoring. Blanks are stacked on the feeding magazine, and separated by a tiny gear rail and air blowing. An procating
    feeding finger push each blank into scoring station, blank is carrie...
Automatic Can Body Separators ( Automated Machines)
  • Model No:
    S-B25S
  • Product Description:
    S-B25S Automatic Can Body Separator horizontal design. Sored can cylinder is carried by a timing screw and a turret. Inner cutter shaft enter can inside and carry cans forward to meet an arc outer rail blade. Cutter edge squeeze the scoring line to s...
Automatic Can Body Neckers ( Automatic Equipment)
  • Model No:
    S-B31
  • Product Description:
    S-B31 Automatic Necker with horizontal design. Can cylinder is carried by a timing screw and a turret. Neck is formed due to guidance from a shaped outer necking die made of ungsten carbide. Proper inner die is to prevent wrinkle. With entralized
    gr...
Automatic Vertical Beading Machines
  • Model No:
    S-B17VBS
  • Product Description:
    S-B17VBS Automatic Vertical Beading Machine is specially designed to make a single bead on the two piece can body wall near can bottom. Trimmed can body (open side face down) is carried by a timing screw and a turret to let beading roller enter can i...
Automatic Scroll Shears
  • Model No:
    S-B26A
  • Product Description:
    S-B26A(B) Automatic Scroll Shear is designed for zig zag shape strip cutting and is recommended to link with Automatic Sheet Feeder S-B23B. Sheet is sent to feeding table, guided by flexible roller side guide (or straight side guide). Two sets of rou...
Automatic Vertical Can Body Neckers
  • Model No:
    S-B31V(H)
  • Product Description:
    S-B31V(H)Automatic Vertical Can Body Necker with vertical design is easily linked and work together with automatic flanger. Can cylinder is carried by a timing screw and a turret. Neck is formed due to guidance from a shaped outer necking die made of...
Automatic Vertical Can Air Testers
  • Model No:
    S-B57L
  • Product Description:
    S-B57L Vertical Air Tester is specially designed for big round can. With special detection elements to get an excellent detecting performance, even small pinhole can be detected easily. Empty can is lifted up by air cylinder to let a plug enter can t...
Automatic Vertical Aerosol Can Air Testers
  • Model No:
    S-B57P
  • Product Description:
    S-B57P Vertical Air Tester is specially designed for aerosol can. With special detection elements to get an excellent detecting performance, even small pinhole can be detected easily. Empty can is lifted up by air cylinder to enter upper detection sl...
Automatic Air Can Testers
  • Model No:
    S-B7A
  • Product Description:
    S-B7A Air Tester is specially designed for round can. With special detection elements to get an excellent detecting performance, even small pinhole can be detected easily. Empty can is carried into by a timing screw and a turret. Pressing plate push ...
Automatic Strip Feed Presses
  • Model No:
    S-B9B
  • Product Description:
    1. Strips lifting by hydraulic cylinder and use proximity switch for strips height control.
    2. With duplex switch for machine starting, safe and reliable.
    3. With Air Clutch for power transmission, effective but low maintenance.
    4. Multi-safety...
Automatic End Markers
  • Model No:
    S-C5S
  • Product Description:
    S-C5S Automatic Marker is specially designed for non-round end embossing. Curled end is separated by a pair of separating knives at end magazine; then feeding bars send it to marking station. End is marked by a pair of rotating making die. Marked end...
Inclinable Power Presses
  • Model No:
    S-D3-20
  • Product Description:
    1. Can connect with conveyor to auto press to reduce labor cost.
    2. With mechanical clutch actuating, effective but low maintenance.
    3. Multi-safety design for machine and personnel safety.
    4. Easy for can size changeover and adjust.
    5. Perfe...
Three Rolling Machines
  • Model No:
    S-A3
  • Product Description:
    1. Machine type: S-A3.
    2. Tin plate size: 480 x 900 x 0.15-0.4mm.
    3. Capacity per min: up to 30 CPM.
    4. Main motor: 1/2HP x 1.
Three Rolling Machines ( Can Making Machines)
  • Model No:
    S-A3
  • Product Description:
    1. Machine type: S-A6.
    2. Range of can dia.: 202 - 401D.
    3. Range of can height: 48 - 125mm.
    4. Capacity per min.: Up to 200 CPM.
Automatic Irregular Can Clinchers
  • Model No:
    S-C87
  • Product Description:
    S-C87 Automatic Irregular Can Clincher is specially designed for irregular can clinching. Filled can is fed forward through a timing screw and a turret to meet with end. Clinching chuck and two clinching rollers push food down and clip end and can bo...
Automatic Gang Slitters
  • Model No:
    S-B2A
  • Product Description:
    S-B2A Automatic Gang Slitter is designed for can body blank cutting and is recommended to link with Automatic Sheet Feeder S-B23B. Sheet is sent to first feeding table, guided by flexible roller guiding bars and is fed into round cutters via one fing...
Automatic Strip Feeder Machine
  • Model No:
    S-B18-2(M)
  • Product Description:
    S-B18-2(M) Automatic Strip Feeder is to link with press for end stamping or can body drawing. Strip piled pallet is to be sent into lower roller table. Rollers on the table ,driven by a motor, turn and carry the pallet forward. Forks lift strip stack...
Automatic Transfer Press Machine
  • Model No:
    S-B110
  • Product Description:
    S-B110 Automatic Transfer Press specially designed to produce aerosol top end, spray lid and threaded oil end. It can be built for single lane or double lanes depending on end size. Max.number of the tooling can be 9 stations for each lane. Capacity ...
Automatic Twist-Off Cap Pre-Curler Machine
  • Model No:
    S-D21
  • Product Description:
    S-D21 Automatic Twist-Off Cap Pre-Curler is designed for the cap fringe inward tiny curl. Cap shells, made by press, are lifted up by an elevator and guided to enter the machine via a chute. Six sets of inner curling rollers enter cap inside and carr...
Automatic Assembly Unit Machine
  • Model No:
    S-B40L (LL)
  • Product Description:
    S-B40L(LL) Automatic Assembly Unit is specially designed for milk powder can top end making. Ring ends and central lids are piled up at two end magazines. Ring end and lid is combined together at first stage and recombined with aluminium membrane at ...
Automatic F.O.E. Repair-Drying Machine
  • Model No:
    S-B10RP
  • Product Description:
    S-B10RP Automatic F.O.E Repair- Drying Machine is specially designed for small tin round full open end. Curled end is separated by a pair of separating knives at end magazine ; then feeding bars send it to spraying station. End is lifted up by a turn...
Automatic Vacuum Fillers ( Automation Machines)
  • Model No:
    S-C7-18V
  • Product Description:
    1. Less floor space required than gravity type filler.
    2. With trap tank which has purpose of retaining and transferring surplus fluid from the vacuum chamber to the liquid tank.
    3. Prevent fluid from sucking into the vacuum chamber.
    4. With no...
Automatic Soft Drink And Beer Fillers ( Automatic Filling Machines)
  • Model No:
    S-C7-40C
  • Product Description:
    1. Liquid is filled by pressure.
    2. Suitable for carbonated soft drink and beer filling.
    3. Can be connected with seamer S-B15 or S-B45.
    4. Precise filling valve is mode of stainless steel, easy for cleaning and maintenance.
    5. CIP (clean in ...
Automatic Liquid Fillers
  • Model No:
    S-C7-6 / S-C7-12
  • Product Description:
    S-C7-6(12)Automatic Liquid Filler is specially designed for round can liquid filling. Empty cans are carried into lifter plate via a timing screw and a turret. Lifter plate is lifted up by a lower cam to lift can to press the filling valve. Filling v...
Automatic Piston Filler Machine
  • Model No:
    S-C7-12(18)P
  • Product Description:
    S-C7-12(18)P Automatic Piston Filler is specially designed for round can sticky liquid filling. Piston move up and down by following the upper cam contour to extract liquid out from tank and fill it into can. Filled cans are carried out by a discharg...
Automatic Liquid Filler Machine
  • Model No:
    S-C7-24 (36,45)
  • Product Description:
    S-C7-24(36,45) Automatic Liquid Filler is specially designed for round can liquid filling. Empty cans are carried into lifter plate via a timing screw and a turret. Lifter plate is lifted up by a lower cam to lift can to press the filling valve. Fill...
Automatic Liquid Filler Machine
  • Model No:
    S-C7-60A
  • Product Description:
    S-C7-60A Automatic Liquid Filler is specially designed for round can liquid filling. Empty cans are carried into lifter plate via a timing screw and a turret. Lifter plate is lifted up by a lower cam to lift can to press the filling valve. Filling va...
Automatic Feeding Machines
  • Model No:
    S-B23B
  • Product Description:
    1. Easy for maintenance and adjustment.
    2. Multi-safety design to insure machine and personnel safety.
    3. Roller table use drive reducer suitable for one operator serves
    multi feeders.
    4. Tinplate (or aluminum) sheet is carry up by three sucti...
Automatic Body Blank Feeding Conveyors
  • Model No:
    S-B39
  • Product Description:
    Can be used to connect slitter (model S-B2A,S-B2B,S-B34) and welder.
Automatic CNC Sheet Feeding Scroll Shear
  • Model No:
    S-B91
  • Product Description:
    S-B91 Automatic CNC sheet feeding scroll shear equipped with three axis synchronized movement is suitable for tin or aluminum pre-scrolled sheet secondary scroll cutting. Reliable linear servo motors, electronic cam control system are incorporated. P...
Automatic CNC Sheet Feeding Press (for Two Piece Can)
  • Model No:
    B23BH+B86B+B85SA+B85ST
  • Product Description:
    This CNC sheet feeding press equipped with four axis synchronized movement is suitable for tin or aluminum two piece can making。First press S-B85SA undertakes 1st drawing process while second press S-B85ST fulfill 2nd drawing process as well as trimm...
Automatic CNC Sheet Feeding Press (double Row Multiple Dies)
  • Model No:
    S-B23E+S-B92+B92C
  • Product Description:
    This CNC sheet feeding press with straight sheet feeding system and double row multiple dies is suitable for high speed alu or tin end making。 Servo motors and PLC control system are incorporated. Programmable integrated sheet take-over system can ge...
Automatic CNC Sheet Feeding Press
  • Model No:
    S-B23E+S-B86B+S-B85SB
  • Product Description:
    This CNC sheet feeding press equipped with four axis synchronized movement is suitable for tin or aluminum end stamping。 Linear motors and PLC control system are incorporated. Programmable integrated sheet take-over system can get precise sheet feedi...
Semi Automatic Can Seamers
  • Model No:
    S-C17V
  • Product Description:
    1. Suitable for home canning.
    2. With one 1st and one 2nd seaming rollers.
    3. Rollers and cluck are made from alloy steel and harden treatment.
    4. Perfect product and built for long lift.
    5. Filled can is lifted up to touch chuck by lifter pl...
6-H Automatic Double Can Seamers
  • Model No:
    B15A(H)
  • Product Description:
    S-B15A(H)Automatic 6H Seamer is specially designed for round empty can closing. Flanged can is fed forward through a timing screw and a chain to enter seaming station equipped with 6 sets of seaming spindle. Turning lifter plate lift can up to meet w...
Semi-Automatic Double Can Seamers
  • Model No:
    S-A20
  • Product Description:
    1. Very sturdy manufacturing of machine flames suitable for round containers making.
    2. Rolls and chuck are made from alloy steel and harden treatment.
    3. Perfect products and built for long life.
    4. With air cylinder for clutch actuating, effe...
Mini Semi-Automatic Double Can Seamers
  • Model No:
    S-A23L
  • Product Description:
    1. With one 1st and one 2nd seaming rollers.
    2. Sturdy machine suitable for round containers making or canning.
    3. Rolls and Chuck are made from alloy steel and harden treatment.
    4. Suitable for lab or home canning.
    5. Portable design for plu...
4H Automatic Double Can Seamers
  • Model No:
    S-B59
  • Product Description:
    S-B59 Automatic 4H Double Seamer is an excellent seamer for medium production purpose. Equipped with four chucks spindles. Cans are carried through a timing screw and turret to enter seaming station while ends are separated by a separating knife then...
4H Automatic Double Can Seamers
  • Model No:
    S-B59SA
  • Product Description:
    S-B59SA Automatic 4H Double Seamer is an excellent seamer for medium production purpose. Equipped with four chucks spindles. Cans are carried through a timing screw and turret to enter seaming station while ends are separated by a separating knife t...
4-H Automatic Double Can Seamers
  • Model No:
    S-C33B
  • Product Description:
    S-C33B(L)Automatic Sanitary Seamer is specially designed for round food can closing. Filled can is fed forward through a timing screw and a chain to enter seaming station. Lifter plate lift can up to meet with end. Can is static while seaming head, m...
Semi Automatic Irregular Can Seamers
  • Model No:
    S-D17A
  • Product Description:
    1. Very sturdy manufacturing of machine flames suitable for irregular shape can seaming.
    2. Rolls and chuck are made from alloy steel and harden treatment.
    3. Perfect products and built for long life.
    4. Clutch device enable the seaming head ke...
Automatic Irregular Can Vacuum Seamers
  • Model No:
    S-C34A
  • Product Description:
    S-C34A Automatic Irregular Can Vacuum Seamer is specially designed for irregular can closing under vacuum . Filled can is fed forward through a timing screw and a chain to enter a pocket of vacuum turret, with six pockets, in vacuum seaming station t...
Automatic Sanitary Seamers
  • Model No:
    S-C3A / S-C3AL
  • Product Description:
    S-C3A(L) Automatic Sanitary Seamer is specially designed for round can closing. Filled can is fed forward through a timing screw and a chain to enter seaming station. Lifter plate lift can up to meet with end . Four seaming rollers undertake seaming ...
Automatic 6-H Double Seamers
  • Model No:
    S-B15 / B15H
  • Product Description:
    S-B15 (H) Automatic 6H Seamer is specially designed for round food can closing.Filled can is fed forward through a timing screw and a chain to enter seaming station equipped with 6 sets of seaming spindle. Turning lifter plate lift can up to meetwith...
Automatic Irregular Can Double Seamer
  • Model No:
    S-M446
  • Product Description:
    S-M446 Automatic Irregular Can Seamer with Clincher is specially designed for irregular can closing. Filled can is fed forward through a timing screw and a turret to meet with end. Clinching chuck and two clinching rollers push food down and clip end...
Automatic Irregular Can Vacuum Seamer
  • Model No:
    S-C86
  • Product Description:
    S-C86 Automatic Irregular Can Vacuum Seamer with Clincher is specially designed for irregular can closing under vacuum . Filled can is fed forward through a timing screw and a turret to meet with end. Clinching chuck and two clinching rollers push fo...
Automatic Vacuum Seamer With Clincher
  • Model No:
    S-C4 + S-C1
  • Product Description:
    S-C4 + S-C1 Automatic Vacuum Seamer is specially designed for round can closing under vacuum . Filled can is fed forward through a timing screw and a chain to enter a clinching station, round chuck and an fixed arc clinching make end and can clipped ...
Automatic Irregular Can Vacuum Seamer
  • Model No:
    S-C85
  • Product Description:
    S-C85 Automatic Irregular Can Vacuum Seamer with Clincher is specially designed for irregular can closing under vacuum . Filled can is fed forward through a timing screw and a turret to meet with end. Clinching chuck and two clinching rollers push fo...
Semi Automatic Seamer Machine
  • Model No:
    S-C17
  • Product Description:
    S-C17 Semi Automatic Seamer is specially designed for round can losing. Operator put end on flanged can and put them on the lifter plate. Then, operator press the foot pedal to make lifter plate lift can up to touch chuck. Can is turning and two seam...
Manual Seamer Machine
  • Model No:
    S-A23L
  • Product Description:
    S-A23L Manual Seamer is specially designed for round can closing. Operator put end on flanged can and put them on the lifter plate. Then, operator press a bottom lever to make lifter plate lift can up to touch chuck. Can is turned by turning chuck. M...
Automatic 3H Vacuum Seamer
  • Model No:
    S-C4A + S-C9
  • Product Description:
    S-C4A + S-C9 Automatic 3H Vacuum Seamer is specially designed for round can closing under vacuum . Filled can is fed forward through a timing screw and a chain to enter a clinching station, round chuck and an fixed arc clinching make end and can clip...
Automatic Vacuum Seamer
  • Model No:
    S-C18
  • Product Description:
    S-C18 Automatic Vacuum Seamer is specially designed for big round can closing under vacuum . Filled can is fed forward through a timing screw and a chain to enter a a pocket of index vacuum turret, with six pockets, to meet with end in vacuum seaming...
Automatic Irregular Can Seamer
  • Model No:
    S-C88
  • Product Description:
    S-C88 Automatic Irregular Can Seamer is specially designed for non-round can closing. Filled can is fed forward through a timing screw and a chain to enter seaming station. Lifter plate clamp and lift can up to meet with end . Four seaming rollers un...
Automatic Irregular Can Seamer
  • Model No:
    S-V465
  • Product Description:
    S-V465 Automatic Irregular Can Seamer with Clincher is specially designed for irregular can closing. Filled can is fed forward through a timing screw and a turret to meet with end. Clinching chuck and two clinching rollers push food down and clip end...
Automatic 12H Seamer
  • Model No:
    S-B65
  • Product Description:
    S-B65 Automatic 12H Seamer is specially designed for round empty or food can closing. Flanged (or filled ) can is fed forward through a timing screw and a chain to enter seaming station equipped with 12 sets of seaming spindle. Turning lifter plate l...
Automatic Scroll Strip Stackers ( Automatic Equipment)
  • Model No:
    S-B37SA
  • Product Description:
    S-B37SA Automatic Scrolled Strip Stacker is to link with Scroll Shear. S-B26A(B) for scrolled strips collection. Scrolled strips are carried forward to collection tray by flat belts, then reciving forks gradually lower. When strips are piled up to pr...
Automatic Ends Stacker And Counter
  • Model No:
    S-B10A-5
  • Product Description:
    S-B10A-5 Automatic End Counter and Stacker is specially designed for small round end and is recommended to link with two sets of lining/drying machine S-B10A. Dried ends are guided by by two chutes to reach the top conveyor then enter collection chan...
Automatic Ends Stacker And Counter (Two Stations)
  • Model No:
    S-B10A-6
  • Product Description:
    S-B10A-6 Automatic End Counter and Stacker is specially designed for round aerosol end and is recommended to link with two sets of lining/drying machine S-B10AP. Equipped with two collection troughs. Dried ends are guided by by two chutes to reach co...
Automatic End Counter And Stacker Machine
  • Model No:
    S-B10AL3
  • Product Description:
    S-B10AL3 Automatic End Counter and Stacker is specially designed for round central lid (for paint can or biscuit can) and is recommended to link with one set of central lid curling machine S-B14C. Curled lids are guided by a chute to reach the inlet ...
Automatic Irregular Can End Lining Machines With Drying Machines
  • Model No:
    S-A17A
  • Product Description:
    1. Witch 2 sets mechanicalc lining gun for end compound lining. easy volumn adjusting.
    2. Drying oven is vertical design, hence save space.
    3. Safety devices provided to ensure M/C running safely.
    4. Auto temperature controller enable to adjust ...
Automatic Lining Drying Machines
  • Model No:
    S-B10AL
  • Product Description:
    S-B10AL Automatic Lining- Drying Machine is specially designed for round end. Curled end is separated by a pair of separating knives at end magazine ;then feeding bars send it to lining station. End is lifted up by a turning chuck. A mechanical gun (...
Automatic Lining Drying Machines
  • Model No:
    S-B10AP
  • Product Description:
    1. With single nozzle for compound spray, easy to adjust the film volumn.
    2. Drying oven is vertical design, hence save space.
    3. Safety devices provided to ensure M/C running safely.
    4. Auto temperature controller enable to adjust the best cur...
Automatic Irregular Can End Lining-Drying Machine (Two Stations)
  • Model No:
    S-D31
  • Product Description:
    S-D31 Automatic Irregular End Lining and Drying Machine, equipped with twin lining stations and twin drying ovens, is designed for non-round end (tin or aluminium end). Curled end is separated by a pair of separating knives on the end magazine; then,...
Automatic Twist Off Cap Forming And Lining Machine
  • Model No:
    S-D29
  • Product Description:
    S-D29 Automatic Twist-Off Cap Forming and Lining Machine is designed for the knurls forming and sealing compound spraying on twist-off cap. Pre-curled cap is carried into via a magnetic conveyor to enter an index turret. Cap is lifted up by a lifter ...
Automatic Twist-Off Cap Lining Machine
  • Model No:
    S-B10TC
  • Product Description:
    S-B10TC Automatic Twist-Off Cap Lining Machine is designed for the sealing compound spraying on twist-off cap. Formed cap is carried into by a conveyor , then is sent to an index turret to lining station. A set of electronic lining gun undertake comp...
Automatic High Speed Rotary Lining Machine
  • Model No:
    S-B89
  • Product Description:
    S-B89 Automatic High Speed Rotary Lining Machine is specially designed for high speed production for small round end. Curled end is separated by a pair of spiral separating knives at end magazine; then feeding turret send it into lining station. End ...
Automatic Lining Machine
  • Model No:
    S-B62
  • Product Description:
    S-B62 Automatic Lining Machine is specially designed for small round end. Curled end is separated by a pair of separating knives at end magazine ;then feeding bars send it to lining station. End is lifted up by a turning chuck. Two sets of electronic...
Automatic Double Wheel Curling Machine
  • Model No:
    S-B18C (CL,CLL)
  • Product Description:
    S-B18C(CL,CLL) Automatic Double Curling Machine with double curling wheel is designed to inward curl the end fringe on round end. Ends punched by a press are delivered by chutes or conveyors into the curling machine. Two turning curling wheels and tw...
Automatic Curling Machine
  • Model No:
    S-B9AC (ACL,ACLL)
  • Product Description:
    S-B9AC(L,LL) Automatic Curling Machine is designed to inward curl the end fringe on round end. End punched by a press is delivered by a chute or a conveyor into the curling machine. A turning curling disc and a set of fixed curling segment curl the e...
Automatic Irrrgular End Curling Machines
  • Model No:
    S-D32
  • Product Description:
    S-D32 Automatic Irregular End Curling Machine with vertical design is easily linked and work together with automatic lining machine. Uncurled end (tin or aluminium end) is carried by a timing screw and a turret. Curl is formed by a chuck and a curlin...
Automatic Multi Dies Press Machine
  • Model No:
    S-B18D
  • Product Description:
    S-B18D Automatic Double Dies Press is built for small can end stamping. Piled strips are lifted by a set of hydraulic cylinders then suck pads send strip one by one to strip feeding station. (also can link with Automatic Strip Feeder S-B18-2M). Recip...
Automatic Double Dies Press Machine
  • Model No:
    S-B18
  • Product Description:
    S-B18 Automatic Strip Feed Press is built for small can end stamping. Piled strips are lifted by a set of hydraulic cylinders then suck pads send strip one by one to strip feeding station. (also can link with Automatic Strip Feeder S-B18-2M). Recipro...
Vertical Double Dies Press
  • Model No:
    S-D3-30V
  • Product Description:
    S-D3-30V Automatic Press is built for two piece can trimming purpose. Formed cans are fed into by two belt conveyors , two reciprocating feeding arms in the side feeding system precisely push and position cans into trimming toolings. Trimmed cans are...
Automatic Inside Spray Machine
  • Model No:
    S-B53(L)
  • Product Description:
    S-B53 Automatic Inside Spray Machine is built for three piece tin can production. One side sealed can bodies are fed into from two top can chutes, carried into two spraying stations by two timing screw and turrets. Two sets of NORDSON spraying guns u...
Automatic Inside Spray Machine
  • Model No:
    S-B53D
  • Product Description:
    S-B53D Automatic Inside Spray Machine (Two stations) is built for three piece tin can production.. One side sealed can bodies are fed into from two top can chutes, carried into two spraying stations by two timing screw and turrets. Two sets of NORDSO...
Automatic Vertical Necker With Flanger Machine
  • Model No:
    S-B54(H)
  • Product Description:
    S-B54(H) Automatic Vertical Necker with Flanger with vertical design is easily linked and work together with automatic double seamer. Can cylinder is carried by a timing screw and a turret. Neck is formed due to guidance from a shaped outer necking d...
Automatic Vertical Can Body Shaper And Flanger Machine
  • Model No:
    S-B68
  • Product Description:
    S-B68 Automatic Vertical Can Body Shaper and Flanger with vertical design is easily linked and work together with automatic double seamer. Can cylinder is carried by a timing screw and a turret, can is lifted up by a lifter plate to let expanding mou...
Automatic Vertical Beading Machine
  • Model No:
    S-B17V
  • Product Description:
    S-B17V Automatic Vertical Beading Machine with vertical design is easily linked and work together with automatic double seamer. Flanged can body is carried by a timing screw and a turret to let beading roller enter can inside. Bead clusters are creat...
Automatic Vertical Flanging Machine
  • Model No:
    S-B32V
  • Product Description:
    S-B32V Automatic Vertical Flanging Machine with vertical design is easily linked and work together with automatic double seamer. Can cylinder is carried by a timing screw and a turret to let swing flanging die (or spin flanging die) form flange. Then...
Manual Can Body Shaping And Flanging Machines
  • Model No:
    S-A32
  • Product Description:
    1. Expanding segments is extended by a pushing cam driven by a hydraulic system.
    2. Can frings is squeezed by two flanging dies, driven by a hydraulic system.
Automatic Vertical Flanging Machines
  • Model No:
    S-B42V
  • Product Description:
    S-B42V Automatic Vertical Square Can Flanger with vertical design. Expanded can is carried into an index turret by a chain pusher. Can is flanged by a pair of squeeze flanging die. Flanged can is carried out by the index turret and is pushed away by ...
Automatic Vertical Flanging Machine
  • Model No:
    S-B74
  • Product Description:
    S-B74 Automatic Vertical Flanging Machine with vertical design is easily linked and work together with automatic double seamer. Can cylinder is carried by a timing screw and a turret to let swing flanging die to form flange. Then, flanged can body is...
Automatic Vertical Can Body Shaper
  • Model No:
    S-B70
  • Product Description:
    S-B70 Automatic Vertical Can Body Shaper with vertical design is easily linked and work together with automatic double seamer. Can cylinder is carried by a timing screw and a turret, can is lifted up by a lifter plate to let expanding mould enter can...
Automatic Can Body Drawing Machine
  • Model No:
    S-B18GL
  • Product Description:
    S-B18GL Automatic Can Body Drawing Machine is built for two piece can drawing Piled strips are lifted by a pair of hydraulic cylinders then suck pads send strip one by one to strip feeding station. (also can link with Automatic Strip Feeder S-B18-2)....
Automatic Vertical Can Body Separator Machine
  • Model No:
    S-B25SV
  • Product Description:
    S-B25SV Automatic Vertical Can Body Separator vertical design is easily linked and work together with automatic vertical necker and flanger. Scored can cylinder is carried by a timing screw and a turret. Inner cutter shaft enter can inside and carry ...
Automatic Vertical Beading Machine
  • Model No:
    S-B73(S)
  • Product Description:
    S-B73(S) Automatic Vertical Beading Machine with vertical design is easily linked and work together with automatic double seamer. Flanged can is carried by a timing screw and a turret and is lifted up by a lifter plate to let inner beading roller ent...
Automatic 6H Double Seamer
  • Model No:
    S-B45
  • Product Description:
    S-B45 Automatic 6H Seamer is specially designed for round empty or food canclosing. Flanged (or filled ) can is fed forward through a timing screw and a chain toenter seaming station equipped with 6 sets of seaming spindle. Turning lifter plate liftc...
Automatic 8H Double Seamer
  • Model No:
    S-B49
  • Product Description:
    S-B49 Automatic 8H Seamer is specially designed for round empty or food can closing. Flanged (or filled ) can is fed forward through a timing screw and a chain to enter seaming station equipped with 8 sets of seaming spindle. Turning lifter plate lif...
Automatic Seamer
  • Model No:
    S-B80A
  • Product Description:
    S-B80A Automatic Seamer is specially designed for square can closing. Flanged can is fed forward through a belt conveyor, top and low tiny stoppers driven by air cylinders work together with two pushers to send can into index seaming turret. A positi...
Automatic Gang Slitter Machine
  • Model No:
    S-B34(M)
  • Product Description:
    S-B34(M) Automatic Gang Slitter is designed for can body blank cutting and is recommended to link with Automatic Sheet Feeder S-B23B. Sheet is sent to first feeding table, guided by a pair of flexible roller guiding bars and is fed into round cutters...
Automatic Gang Slitter (Single)
  • Model No:
    S-B34S
  • Product Description:
    S-B34S automatic Gang Slitter for strip cutting. The S-B34S cutter shaft equipped with tapper roller bearings on each end, ensure strips with maximize accuracy for stamping press. Mechanical clamping hubs are also equipped. Easy cutter hub change wit...